Micro Innovations M000174-19 manual Device Restart Reboot, Information Display Info

Windows CE Programs

7.15DEVICE RESTART (REBOOT)

The auxiliary program reboot.exe executes a device restart. When no command line parameter is entered, a confirmation prompt will appear that has to be acknowledged by the user before the device is restarted. If the call is executed as follows «reboot.exe –quiet», no confirmation prompt will appear.

7.16INFORMATION DISPLAY (INFO)

The auxiliary program info.exe displays the information of the system.

The following command line parameters are supported:

Parameter	Description
-fullscreen	The program uses the full screen, i.e. the taskbar is not visible.
-first	Displays additional information for new users.
-export «file»	The information is written to the specified file. The file is only overwritten if the
	content is changed. Otherwise it is not overwritten.
-h or -?	Displays information on the available command line parameters.

7.17FILE SYSTEM SIZE (STORAGEMEMORYSIZE)

The auxiliary program StorageMemorySize.exe can be used to change the size for the file system. For the file system, the system takes by default 1/8 of the entire memory less the memory requirement of the operating system. In specific cases it can be of use to change this setting.

The following command line parameters are supported:

Parameter	Description
-size	Size of the file system in MBytes (for the program memory at least 1 MByte is
	additionally reserved for the program memory currently used)
	Actual file system size in KBytes
-h or -?	Displays information on the available command line parameters.

M000174-19 73