Windows CE | Programs |
7.5FTP SERVER
The FTP server (File Transfer Protocol) is used for transferring files via the Ethernet. The server program for Windows CE is called «FtpSvr.exe».
The following dialog appears on startup.
The Hide function is used to minimize the dialog, i.e. it
is reduced to the 
icon inside the start bar. Double touching this icon will then cause the above dialog to be displayed again. A password protection can be activated via Password Settings (see Password settings). Touching the Stop button will disconnect an active FTP connection and stop the FTP server. Touching Start will restart the FTP server and enables an FTP connection to be
Use:
•Upload/download of the project
•Up/download of the password and recipe data
Procedure:
•Start the FTP server on the panel via the Start menu.
•Configuration of an FTP connection in GALILEO or another program. For this, the IP address, the user name and the password must be known. A new device has the following factory settings:
IP address: | IP address |
User name: | Ignored |
Password: | Can be used if required |
•Transfer of the files
•Closing of the FTP server
Note:
Only files that are NOT being used or processed at the same time by other programs can be accessed. For greater security the FTP server should not be permanently active.
51 |
