Micro Innovations M000174-19 manual Touch Disable/Enable Touch Lock, Echo OFF

System settings		Windows CE
	Touch Disable/Enable	Touch Lock
	ECHO ON	ECHO ON
	Touch.exe –disable	Touch.exe –lock
	….other command lines!!!	….other command lines!!!
	Touch.exe –enable	ECHO OFF
	ECHO OFF

4.11.2TOUCH CALIBRATION

Note:

Touch calibration is only required for resistive touch devices.

Touch calibration only needs to be carried out if a MICRO PANEL with a resistive touch is no longer reacting correctly to screen touch operations.

If the program is started with «Touch.exe –r», the calibration is called immediately and the following displays appear. This call can also be implemented in the Autoexec.bat file.

Note:

The touch stylus for calibration is supplied with the device. Do not use any other pointed objects as these might damage the resistive foil!

The following display will appear on screen after calibration is started with the «Recalibrate» button. A touch stylus is required for the calibration process. Follow the on-screen instructions.

Press and hold the stylus briefly in the middle of the target (cross-hair) repeat this while the target is moving.

The following screen will appear once the calibration has been carried out successfully. The calibration is completed as soon you confirm calibration by touching the screen. The calibration data is stored as persistent data in the device, i.e. it is also retained after a restart.

36 M000174-19