Micro Innovations M000174-19 manual Menu item Description, Chapter Touch Enable/Disable

Programs Windows CE

7.4.2SYSTEM MENU

The System menu contains the following entries, although not all entries are available in Windows CE:

	Menu item	Description:
	Request screen refresh	This function refreshes the view in the remote client.
	Touch lock	These functions enable	the touch	to	be	locked/unlocked	or
	Touch unlock
		enabled/disabled. Further	information	on	this	is provided in the
	Touch disable
		chapter Touch Enable/Disable.
	Touch enable
	Send Ctrl-Alt-Del	These functions execute the corresponding button combination on
	Send Ctrl-Esc	the device. «Ctrl-Alt-Del» and «Alt-Tab» launch the Task Manager,
	Send Alt-Tab	«Ctrl-Esc» activates the START button on the Windows start bar.
**	Ctrl Down	These functions are used to enable key combinations using ALT and
	Ctrl Up	CTRL to be run on the device. For example, if «Ctrl Down» is
	Alt Down	executed, the CTRL button stays «actuated»				until «Ctrl Up»	is
		executed. These functions are only used with older versions of the
	Alt Up
		remote server.

**These functions are not available, if the command line parameter –nospecialkeyis used. The menu items vary according to the version of the remote server.

Note:

The System menu on the remote client for Windows CE is called using the ? button in the title bar.

7.4.3COMMAND LINE PARAMETERS

Start the remote client on the Panel/PC. The command line call supports the following parameters:

Parameter	Description
server:Port	See also Remote server
-rotate
-fullscreen	See chapter Options
-viewonly
-scale x/y
-raw	Communication with the remote server without compression.
-hextile	Communication with the Remote server executed with HEXTILE compression.
-pcx (default)	Communication with the Remote server executed with PCX compression
	(recommended).
-nospecialkey	Removes the menu items «Send Ctrl-Alt-Del», «Send Ctrl-Esc» and «Send
	Alt-Tab» from the System menu.

50 M000174-19