Micro Innovations M000174-19 manual Deactivates a previously activated password protection

Programs Windows CE

7.5.1PASSWORD SETTINGS

The password settings are stored in the «FtpSvr.ini» file in the directory «\“Bootdevice”\OS\». The data stored is naturally encrypted. The file is stored on the boot device, which means that the password settings are also retained after a restart.

7.5.2COMMAND LINE PARAMETERS

The following parameters are supported:

Parameter	Description
-d	Deactivates a previously activated password protection.
-p «Password»	Activates the password protection with the new password transferred as a
	parameter.
-i «File»	Defines the path to the INI file in which the password settings are saved. If
	the password protection is activated without the /i parameter, an INI file
	«FtpSvr.ini» is created in the directory «\StorageCard\OS». The INI file
	only contains encrypted data.
-h	Minimizes the server dialog immediately to the status bar when the server
	is started (dialog not visible).
-exit	Exits the FTP server. This call only has a function if the server is already
	running.
-port «number»	Defines the port number of the FTP server, the default port number is 21.
	Only values between 0 and 65535 are allowed.
-prio low	The setting «high» sets the priority of the FTP server to 1 higher than
-prio high	normal, «low» sets the priority to 1 below normal. This setting is optional.
-root «directory»	Defines the root directory. Changing to upper directories is not allowed.
-timeout «sec.»	Defines the timeout in seconds (default is 5, maximum is 120). This is
	helpful for slow connections via modem.

52 M000174-19