Miller Electric Welder Setting SharpArcE Control, Selecting And Adjusting SharpArcE Control

SECTION 12 – SETTING SharpArcE CONTROL

12-1. Selecting And Adjusting SharpArcE Control

> Process	> Prg 1
Sequence	Pulse
SharpArc	035” Steel
Card	Argon – Oxy

1 SharpArc

SharpArc is used to adjust arc cone width and arc characteristics.

Use mode select button to move > to select SharpArc. Use Display Control to adjust Arc setting.

SharpArc setting range is from 0 to 20. The factory default is set at zero (0). When Arc value is increased toward 20, the arc cone narrows and the weld puddle becomes less fluid.

Mode

Select

1

Process

Sequence

>SharpArc Card

>SharpArc 0

Parameter

Select

SharpArc

>0

Set Desired Value

Increase/Decrease

SharpArc

>10

Parameter

Select

>SharpArc 10

OM-196 188 Page 100