Miller Electric Welder operating instructions Selecting Or Changing Access Code, Zwx

14-3. Selecting Or Changing Access Code

NOTE

Access code works only when a data card is inserted (see Section 13).

Access
Setup	1
Display
>Access	Code
Mig Type	> Off
Aux Out
Voltage
Press Mode
Select

Increase

Code

> On

AAA

Parameter

Select

Code

On

> AAA ⇒Press

Increase/Decrease

To Set Code

Parameter Select

To Move Indicator

Code

On

> ZWX

⇒Press

Turn Power Off And Back On

And Access Security Display

2

Enter	> Code AAA
Access
Code	⇒Press

1 Code Display

With code off, access to the setup displays is not restricted.

With code on, the operator must know and enter the access code to access or change any of the setup displays.

2 Access Display

With a code set, this display appears when power is turned on while holding the pulse panel Mode and Parameter Select buttons.

Press Parameter Select button to enter access code. When the correct letter is entered, the indicator automatically moves to the next character. When the final access code letter is entered, the display automatically changes to the initial setup display.

OM-196 188 Page 109