18
1. Printer Parts and Accessories
PRINTER
Using the Printer CHAPTER 2
Print Tray
The printed paper is fed out face down onto this tray. The tray can hold 250 sheets
of printed paper. ☞p. 34
Power Switch
Use to turn the printer ON and OFF ☞p. 23
Front Cover
Swing open to change supplies such as the Toner Cartridge or to clear
a paper misfeed.
Control Panel
-Allows the operator to make various settings.
Front Cover Lock Release Lever
Pull down to unlock the Front Cover.
TRAY 1 (Multi Purpose Tray)
-Swing open toward you to load paper.
-Holds up to 150 sheets of paper. ☞p. 24
TRAY 2
Holds up to 250 sheets of paper. ☞p. 24
TRAY 3
Holds up to 250 sheets of paper. ☞p. 24
250-Sheet Third Cassette Unit (Option)
When installed under the Printer, houses a third cassette increasing paper capacity to 650 sheets.
Grips
-Two grips are provided on each side of the printer (four in all). Used to hold the printer when installing or moving it.
-The printer should be lifted by two persons. ☞p. 5
Network Board Panel
☞p. 14
Rear Cover Lock Release Lever
Pull down to swing open the Rear Cover.
Rear Cover
Swing open to change the Oil Roller Assembly or clear a paper misfeed.
Interface Connector (Serial Connector)
Provides connection between the printer and host computer.
☞p. 8
Interface Connector (Parallel Connector)
Provides connection between the printer and host computer.
☞p. 8
Power Cord Socket
Connect the power cord of the printer to this socket.