57
1. Changing Cartridges
6
7
-HOLD THE GREEN HANDLE of the Drum Cartridge when installing it into the printer.
-Install the Drum Cartridge in the printer, aligning its protrusions with the slots inside the printer frame.
-PUSH DOWN ONLY ON THE GREEN SQUARES on the top face of the Drum Cartridge.
-The Cartridge clicks into place when it is installed correctly.
8
9
10
11
NOTE
-DO NOT PUSH ON the Drum Cartridge Shutter when installing the Drum Cartridge.
Doing so may damage the Drum Cartidge.
- Remove the old Waste Bottle from the printer.
-Remove the Bottle Cap on the old Toner Collecting Bottle and fit it to the mouth of that Bottle to prevent waste toner from falling out.
NOTE
-Make sure that the Shutter at the toner exit of the Image Transfer Belt Unit is closed securely. Loading a new Waste Bottle with the Shutter open will lead to internal contamination, reduced print quality and/or a failure.
