81
2. A Problem Exists in the Preparation Stage and During a Print Cycle
7
8
9
10
- Pull out the paper misfed in the Fusing Unit.
-Lift the Misfeed Clearing Guide of the Fusing
Unit and pull out the paper misfed in the Fusing Unit.
Misfeed
Clearing
Guide
-Hold the Lock Release Lever Button and push the Fusing Unit in.
-The Fusing Unit will click into place when it is installed correctly.
-Make sure that the button of the Fusing Unit Lock Release Lever is pushed up as shown.
OK (LOCKED)
NG (UNLOCKED)
11
12
13
14
-Close the Rear Cover.
-The Rear Cover will click when it is closed correctly.
-Make sure that the button of the Rear Cover Lock Release Lever is pushed up as shown.
OK (LOCKED)
NG (UNLOCKED)
-Grasp and pull down the Front Cover Lock Release Lever to swing open the Front Cover
Front Cover Lock
Release Lever
NOTE
-Whenever the printer is opened, wrap the Front Cover with a cloth or the like so that the Drum Cartridge is not exposed to light.
