70
2. Cleaning the Printer
Dust, dirt, and paper dust on the surfaces and inside the printer can interfere with proper printer per- formance and quality. Clean the printer at regular intervals.
NOTE
-Before starting the cleaning procedure, be sure to turn OFF the Power Switch and unplug the power cord from the outlet.
-Use a soft cloth for cleaning. Do not use abrasives or corrosive detergent.
CHAPTER 4
ATTENTION
The Fusing Unit inside the Rear Cover can become very hot during operation. Do not touch the area as it may cause a burn.
Maintaining Your Printer
1
1
Cleaning the Outside
-Using a soft cloth dampened with mild dishwashing detergent, wipe the outside of the printer clean of dirt.
Cleaning the Inside
-Grasp and pull down the Front Cover Lock Release Lever to swing open the Front Cover
Front Cover Lock
Release Lever
2
3
4
NOTE
-Whenever the printer is opened, wrap the Front Cover with a cloth or the like so that the Drum Cartridge is not exposed to light.
- Lift the Misfeed Clearing Lever.
-Using a soft cloth, wipe dirt and paper dust off the roller shown.
