59
1. Changing Cartridges
NOTE
19 - The Fusing Unit is hot. Be careful not to touch the area carrying the WARNING! HIGH TEMPERATURE label.
-Before changing the Oiling Roller, wait until the surface temperature of the Fusing Unit falls and make sure that the temperature is safe for replacement.
WARNING! HIGH TEMPER-
ATURE label
-Loosen the installation screws (2 places) in the Oiling 20 Roller.
22
23
24
-Remove a new Oiling Roller from its carton.
-Insert the front end of the guide on the new Oiling
Roller into the installation hole of the Fusing Unit to install the Oiling Roller.
Guides
NOTE
-Do not touch the Oiling Roller as its surface is impregnated with silicone oil.
-Tighten the installation screws (2 places) in the Oiling Roller.
Maintaining Your Printer CHAPTER 4
21
- Hold the grip and take out the Oiling Roller.
25
-Hold the Lock Release Lever and push the Fusing Unit in.
-The Fusing Unit will click into place when it is installed correctly.
