Mitel SME Server V5 with ServiceLink manual Hardware Requirements for a Category 3 Server

Chapter 5. Hardware Requirements of the SME Server V5 with ServiceLink Host Computer

CD-ROM drive	ATAPI or SCSI
Floppy drive	any
Monitor	any
Graphics card	any
Mouse	none required
Sound card	none required

5.3. Hardware Requirements for a Category 3 Server

Table 5-5. Definition of a Category 3 Server

# of Users	Up to 40
Usage	Heavy (heavy use of remote access, file sharing and other disk-intensive activity)
Table 5-6. Hardware Requirements of a Category 3 Server
Architecture	PCI-based Pentium-class processor
Processor speed	600 MHz (or better)
Minimum RAM	256 MB
Hard drive	IDE or SCSI (SCSI highly recommended) - at least 10 GB
SCSI adapter	SCSI adapter must appear on the supported list (only necessary for SCSI systems)
Ethernet adapters	The ethernet adapters installed on your server must appear on the supported list.
Modem (for dialup only)	Only modems that are Linux-compatible may be used. WinModems are not supported.
CD-ROM drive	ATAPI or SCSI
Floppy drive	any
Graphics card	any
Mouse	none required
Sound card	none required

25