
A - 5
CAUTION
Before operation, check the parameter settings. Improper settings may cause some machines to perform
unexpected operation.
The parameter settings must not be changed exc essively. Operation will be insatiable.
CAUTION
Provide an external emergency stop circuit to ensure that operation can be stopped and power s witched
off immediately.
Any person who is involved in disassembly and repair should be ful ly competent to do the work.
Before resetting an alarm, make sure that the r un signal of the servo amplifier (drive unit) is off to prevent
an accident. A sudden restart is made if an a larm is reset with the run signal on.
Do not modify the equipment.
Use a noise filter, etc. to minimize the influenc e of electromagnetic interference, which ma y be caused by
electronic equipment used near the converter unit and servo am plifier (drive unit).
Burning or breaking a converter unit and servo ampl ifier (drive unit) may cause a toxic gas. Do not burn or
break a converter unit and servo amplifier ( drive unit).
Use the converter unit and servo amplifier (dr ive unit) with the specified servo motor.
The electromagnetic brake on the servo motor is designed to hold the motor shaft and should not be used
for ordinary braking.
For such reasons as service life and mechanic al structure (e.g. where a ball screw and the ser vo motor
are coupled via a timing belt), the electromagnet ic brake may not hold the motor shaft. To ensur e safety,
install a stopper on the machine side.