3 - 34
3. SIGNALS AND WIRING
3) With holding a tab of SSCNET cable connector, make sure to insert it into C N1A CN1B connector
of servo amplifier until you hear the click .
If the end face of optical code tip is dirty, op tical transmission is interrupted and it may caus e
malfunctions.
If it becomes dirty, wipe with a bonded textile, etc.
Do not use solvent such as alcohol.
Click
Tab
(b) Removal
With holding a tab of SSCNET cable connector, pull out the connector.
When pulling out the SSCNET cable from servo amplifier, be sure to put the cap on the connector
parts of servo amplifier to prevent it from bec oming dirty.
For SSCNET cable, attach the tube for protection optical code's end face on the end of connector.