2Press the PTT button and speak clearly into the microphone. The LED indicator lights steady red while the call is being sent.
3Release the PTT button to listen.
RECEIVING A TRUNKED OR CONVENTIONAL CALL
1Turn your radio on.
2Adjust your radio’s volume (see page 29).
3Use the Zone Selector knob to select the desired Trunked or Conventional zone. Make sure the PTT button is released.
4Listen for voice activity. The LED indicator flashes red when your radio is receiving.
Note: The Mobile Identification Number
(XXXX)or Alias (if preprogrammed) of the calling radio appears on the display if Caller ID is enabled.
XXXX
REPEATER OR TALKAROUND J
MODE
Note: This feature is available only with Conventional operation.
Talkaround mode enables you to communicate with another radio when:
•The repeater is not operating
•Your radio is out of the repeater’s range, but within communicating distance of another radio.
Note: The display shows Jwhen Talkaround mode is selected.
To select Repeater or Talkaround mode:
Press the preprogrammed Repeater/ Talkaround button (see page 16) to toggle between Repeater and Talkaround mode.
1)to enter Menu mode.
2 | +or ?until | Rptr/Talkarnd |
|
|
|
3 | )to select | Rptr/Talkarnd |
|
|
|
31
GETTING STARTED
English
