Motorola HT1250LS+ Product Safety And Rf Exposure Compliance, Battery Information, English

SAFETY

PRODUCT SAFETY AND RF EXPOSURE COMPLIANCE

BATTERY INFORMATION

Charging Batteries

This product is powered by a nickel-cadmium (NICd), nickel-metal-hydride (NiMH), or lithium-ion rechargeable battery. Charge the

!

C a u t i o n

Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio.

battery before use to ensure optimum capacity and performance. The battery was designed specifically to be used with a Motorola charger. Charging in non-Motorola equipment may lead to battery damage and void the battery warranty.

ATTENTION!

This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 68P81095C98) to ensure compliance with RF energy exposure limits.

For a list of Motorola-approved antennas, batteries, and other accessories, visit the following web site which lists approved accessories: http://www.motorola.com/cgiss/index.shtml.

Note: When charging a battery attached to a radio, turn your radio off to ensure a full charge.

The battery should be at about 77°F (25°C) (room temperature), whenever possible. Charging a cold battery (below 50°F [10°C]) may result in leakage of electrolyte and ultimately in failure of the battery. Charging a hot battery (above 95°F [35°C]) results in reduced discharge capacity, affecting the performance of your radio. Motorola rapid-rate battery chargers contain a temperature- sensing circuit to ensure that batteries are charged within the temperature limits stated above.

5

SAFETY

English