Motorola HT1250LS+ manual Passport Group Scan G, English

SCAN

Note: This feature is automatically enabled in your radio and not through the radio menu or through a preprogrammed scan button.

PASSPORT GROUP SCAN G

(PASSPORT TRUNKED OPERATION ONLY)

PassPort Group Scan scans talkgroups within the selected PassPort Trunked zone, as programmed by your dealer. Up to 16 different talkgroups can be programmed into each Scan list, with one Scan list assigned to each position on the Zone Selector knob. You can edit these Scan lists through your radio’s menu (see page 66).

When PassPort Group Scan is enabled:

•The Gsymbol appears on the display.

•The LED indicator blinks green during PassPort Group Scan operation; it stops blinking when your radio switches to an active talkgroup or channel.

62

Note: PassPort Group Scan is not available when registered on an affiliated (non- home) site.

If you switch to another PassPort zone, LTR, or Conventional zone while your radio is scanning, scanning resumes upon return to the PassPort zone where PassPort Group Scan was enabled.

If your radio is turned off while scanning, the radio resumes scanning when you turn it back on. If your radio registers on a non-home site, scanning is not enabled until your radio registers at its home site.

To start PassPort Group Scan operation:

Press the preprogrammed Scan button (see page 16).

To stop PassPort Group Scan operation: Press the preprogrammed Scan button again.

To start or stop PassPort Group Scan operation through the menu:

1)to enter Menu mode.

English