Motorola HT1250LS+ manual Xxx-Xxx-Xxxx

5(For Conventional operation with auto access only). You hear a series of tones, indicating that an access code is being sent automatically, and see your access code:

–or–

Enter your access code using the keypad.

6When you hear a dial tone:

Note: To redial the last number dialed (if not using Speed Dial), press and release the PTT button immediately after the access code is sent. Your radio sends the last number dialed.

–or–

If you entered your access code using the keypad, press the ?key once to access the last number dialed; then

Enter the phone number using the keypad.

–or–

+or ?to select a number from the phone list.

–or– (see step 7)

XXX-XXX-XXXX

XXX-XXX-XXXX

press and release the PTT button.

8	Press and release the PTT button, if required
	for your radio.
9	Hold your radio in a vertical position with the
	microphone 1 to 2 inches (2.5 to 5
	centimeters) away from your mouth. Press the
	PTT button to talk; release it to listen.
10	To disconnect a phone call, do one of the

7a Press and release the preprogrammed Speed Dial button (see step 6) to use the Speed Dial feature.

bPress the key (1 to 9) corresponding to the number you want to call, or press 0 if you want to call the last number dialed.

following:

Enter the deaccess code using the keypad.

–or–

If your radio has the deaccess code programmed, go to step 9.

73

PHONE

English