Motorola HT1250LS+ manual Editing A Scan List, English

SCAN

To temporarily Delete a Nuisance Channel/ Talkgroup:

1While your radio’s receiving activity is on the nuisance channel, press and hold the Scan button until you hear a high-pitched tone (valid key press).

2Release the Scan button. The nuisance channel has been temporarily deleted from your Scan list.

Note: In PassPort mode, you cannot delete a priority channel/talkgroup (see page 68), or the currently selected talkgroup in a Scan list.

To restore a previously deleted Channel/ Talkgroup to the Scan List, restart the scan operation or turn your radio off and on again.

Note: In PassPort mode, the talkgroup can also be restored by scrolling through the list, or switching the current selected talkgroup or zone.

EDITING A SCAN LIST

Note: This feature is applicable to PassPort Group Scan or System Scan operation only.

One Scan list is assigned to each of the 16 positions on the Zone Selector knob. Each Scan list can contain up to 16 talkgroups and/ or channels. The same talkgroup or channel can be included in several Scan lists, and the same Scan list can be assigned to several Zone Selector positions.

When you edit a Scan list, you can either add, delete, or prioritize talkgroups or channels.

Note: In PassPort mode, talkgroups cannot be prioritized.

Your radio cannot receive any calls while you are editing a Scan list. The display shows K symbol while you are editing.

Note: In Conventional operation, even if there is activity on a non-priority channel, your radio automatically switches to an active priority channel and indicates the activity with a short tone.

66

English