SCAN
•The display shows G.
•The LED indicator blinks green; it stops blinking when your radio switches to an active talkgroup.
Note: If you enter Menu mode while your radio is scanning, scanning stops. The radio resumes scanning when you exit Menu mode.
To start All Group Scan, press the preprogrammed All Group Scan button (see page 16) once.
To stop All Group Scan, press the preprogrammed All Group Scan button again.
To start or stop All Group Scan Operation through the menu:
1)to enter Menu mode.
2 | +or ?until | All Group Scan |
3 | )to select | All Group Scan |
You see the current scan status.
64
4 +or ?until | All Group On? |
All Group Off? |
5)to confirm your selection.
SYSTEM SCAN G
(LTR TRUNKED AND CONVENTIONAL OPERATION ONLY)
System Scan scans Trunked talkgroups and Conventional channels between LTR and Conventional zones, as programmed by your dealer. Up to 16 different talkgroups or Conventional channels can be programmed into each Scan list. You can edit these lists through your radio’s menu (see page 66).
When System Scan is enabled:
•The display shows G.
•The LED indicator blinks green during System Scan operation; it stops blinking when your radio switches to an active talkgroup or channel.
English
