Multi-Tech Systems MT3410ZLX-T/2 owner manual Registers ATSn=x

MultiMobile Owner’s Manual

S-Registers (ATSn=x)

Certain modem parameters are stored in memory locations called S-Registers. Use the S command to read or alter the contents of S-Registers.

S0= 0-255

S0 sets the number of the rings required before the modem automatically answers a call. Set “S0=0” to disable auto-answer mode. The factory default setting is 0.

S1= 0-255

S1counts the incoming rings and stores the value to this register. The value of this register is incremented with each ring. If no rings occur over an 8 seconds interval, this register is cleared. User can read but should not change this value. The factory default setting is 0.

S2= 0-255

S2 holds the decimal value of the ASCII character used as the escape character. The default value

(043)corresponds to an ASCII character “+” (plus). A value of 128 to 255 disables the escape process, i.e., no escape character will be recognized 043.

S3= 0-127

S3 holds the decimal value of the Carriage Return <CR> character used as the command line and result code terminator (asynchronous operation only). The factory default is 013.

72