MultiMobile Owner’s Manual
Result Codes
In Command mode, the MT3410ZLX can send information and status responses, or Result Codes, to your computer. Result Codes are used by communications programs and can also appear on your monitor. The form of the Result Code information displayed can be defined using the Qn, Vn, Wn and Xn commands.
Basic Result Codes
ATW0: | report DTE rate |
Example: | CONNECT 57600 |
ATW2: report DCE rate | |
Example: | CONNECT 28800 |
AT\V1: report connection protocol
CONNECT DTE_or_DCE_speed connection_protocol
Example: | CONNECT 57600/NONE for |
| normal mode connection |
| CONNECT 28800/MNP for MNP |
| connection |
| CONNECT |
| LAPM connection |
78
