| Appendices |
|
|
Command | Options Function & Description |
Q1 | Result code disabled |
T | Enable tone dialing |
Vn | Result code form |
V0 | Display result code in numeric form |
| (see also the result code options table) |
V1 * | Display result code in verbose form |
Wn | Select extended result codes |
W0 * | CONNECT result code reports DTE |
| speed (see also the “Result Code |
| Options Table”) |
W1 | CONNECT result code reports DTE |
| speed; enable the CARRIER, |
| COMPRESSION, and PROTOCOL |
| extended result code |
W2 | CONNECT result code reports DCE |
| speed |
Xn | Select result codes/call progress |
| options |
X0 | Display CONNECT or “1” for all |
| speeds |
X1 | Display connect message according to |
| “ATW” and “AT\V”, blind dial, ignore |
| busy tone |
X2 | Display connect message according to |
| “ATW” and “AT\V”, wait for dial tone, |
| ignore busy tone |
X3 | Display connect message according to |
| “ATW” and “AT\V”, blind dial, check |
| busy tone after dialing |
X4 * | Display connect message according to |
| “ATW” and “AT\V”, wait for dial tone, |
| check busy tone after dialing |
Zn | Recall stored profile |
Z0 | Reset and recall user profile 0 |
Z1 | Reset and recall user profile 1 |
* Factory default setting
63
