|
| Appendices |
| ||
AT- (Dash) Commands | ||
Command Options | Function & Description | |
Set V.42 detection phase | ||
Disable V.42 detection phase | ||
Enable V.42 detection phase | ||
Display firmware version number | ||
“Hn | V.42bis compression control | |
“H0 | Disable V.42bis | |
“H1 | Enable V.42bis only when transmitting | |
| data |
|
“H2 | Enable V.42bis only when receiving | |
| data |
|
“H3 * | Enable V.42bis for both transmitting | |
| and receiving directions | |
* Factory default setting
71
