Chapter 2 Message List
302
iSM11711: Volume list data does not exist.
[Classification] WARNING
[Explanation] Volume list does not exist.
[Measures] Create/update the volume list.
iSM11712: Volume list data is not created by the
command which supports property
display.
[Classification] WARNING
[Explanation] The property of the volume list could not be obtained because it is old.
[Measures] If the property is required, recreate the volume list.
iSM11713: Some definitions of control volume
are invalid.
[Classification] WARNING
[Explanation] Some definitions of control volume are invalid. The volume list was
created/updated ignoring the invalid definitions.
[Measures] Display the control volume and check its definition status. And, check the
definition of control volume and re-create the volume list.
iSM11714: Volume list data has no control
volume.
[Classification] WARNING
[Explanation] No control volume.
[Measures] If you want to use control volume, re-create and register a volume list after
defining control volume.