Chapter 2 Message List
504
iSM14445: Set SNMP Request permission :
number=<aa>h, SNMP Valid=<bb>,
Community Name=“<ccc...c>”,
SNMP Valid IP Address=<ddd...d>,
<ddd...d>..., status=<eee...e>
[Classification] INFO
[Explanation] Indicates access restriction has been specified by SNMP request. Information
specified here becomes valid after resetting disk array or service processor.
aa : Service processor number
bb : Access restriction status by SNMP request (on or off)
ccc...c : Community name
ddd...d : IP address to allow access (only when access restriction is on)
eee...e : Command execution status
good : Normal
failed(xxxx) : Error occurred (xxxx is error description)
---- : Interrupted
[Measures] When an error occurs (status=failed was output), the configuration or setting of
the disk array may be changed. After updating it to the newest information or
restarting state monitoring, check current state and execute again.