NEC IS010-12E - page 509

Chapter 2 Message List

503

iSM14444: Set SCSI Socket permission :

number=<aa>h, SCSI Socket Guard

Invalid=<bbb>, SCSI Socket Valid IP

Address=<ccc...c>,<ccc...c>...,

status=<ddd...d>

[Classification] INFO

[Explanation] Indicates access restriction has been specified on monitoring server.

Information specified here becomes valid after resetting disk array or service

processor.

aa : Service processor number

bbb : Access restriction status on monitoring server (on or off)

ccc...c : IP address to allow access (only when access restriction is on)

ddd...d : Command execution status

good : Normal

failed(xxxx) : Error occurred (xxxx is error description)

---- : Interrupted

[Measures] When an error occurs (status=failed was output), the configuration or setting of

the disk array may be changed. After updating it to the newest information or

restarting state monitoring, check current state and execute again. If state

monitoring cannot be restarted, specified IP address, etc., may be wrong. If a

wrong IP address, etc. have been specified, disable access restriction with

iSMnetconf command, and retry command execution.

Contents

Main Messages Handbook Page Preface Page Contents Page Chapter 1 Messages and Output Destinations Chapter 1 Messages and Output Destinations Chapter 1 Messages and Output Destinations Management server Figure 1-1 Overview of Message Output Page Page Chapter 1 Messages and Output Destinations Page Page Page Page iSM01004: Storage Manager has terminated emergency iSM01005: Command is entered.command= <aaaa> iSM01006: Termination of Storage Manager is started iSM01010: Storage Manager has restarted iSM01011: <aaa...a> has restarted iSM01101: The function is not available. function=<aaa...a> iSM01102: Command failed Page iSM01105: File access failed. file=<aaa...a> func=<bbb...b> errno=<ccc> detail=<dd-eee> iSM01107: <aaa...a> process has terminated abnormally iSM01108: Storage Manager has already started iSM01109: Internal error occurred. detail=<aa-bbb> Page iSM01111: User definition does not exist, Client cannot be connected. file=<aaa...a> iSM01230: Storage Manager has terminated abnormally iSM01232: Storage Manager has terminated abnormally by signal.signo=<aaa> iSM01400: This function is not supported Page iSM01408: Rejected: System function error (<aaa...a>) <bbb...b> iSM01409: Rejected: msgdrv is not available iSM01410: This request is accepted iSM01411: Rejected: PerformanceMonitor is not available iSM01412: Internal error. detail=<aaaa> iSM01413: Usage: iSMsvr prf_update -t value iSM02000 iSM02010: In initialization, port setting failed errno=<aaaaa> iSM02011: In initialization, shared memory allocation failed errno=<aaaaa> iSM02020: Function Error has occurred name=<aaa...a> code=<bbbbb> errno=<ccccc> iSM02021: Internal Error has occurred code=<aaaaa> errno=<bbbbb> iSM02040: iSM/Client connected user=<aaa...a> client=<bbbbbbbb> ip=<ccc...c> iSM02041: iSM/Client terminated user=<aaa...a> client=<bbbbbbbb> ip=<ccc...c> iSM02042: iSM/Client disconnected user=<aaa...a> client=<bbbbbbbb> ip=<ccc...c> reason=<ddd> iSM02043: iSM/Client connect failed user=<aaa...a> client=<bbbbbbbb> ip=<ccc...c> reason=<ddd> iSM02050: iSM/Client Management Service started iSM02051: iSM/Client Management Service terminated iSM02052: iSM/Client Management Service termination started iSM02053: iSM/Client Management Service is waiting for L3 users termination iSM02060: Data lost detected client=<aaaaaaaa> ip=<bbb...b> iSM02061: Data lost recovered client=<aaaaaaaa> ip=<bbb...b> iSM03000 iSM03100: Disk Array is not specified in the config file. detail=<aa-bbbb> iSM03101: Object Disk Array does not exist. detail=<aa-bbbb> iSM03102: Diskarray[<a>] and diskarray[] are the same disk. detail=<cc-dddd> iSM03103: IP address (<aaa...a>) in diskarray[] is invalid description. detail=<cc-dddd> Page Page iSM03108: File (<aaa...a>) in diskarray[] is invalid description. detail=<cc-dddd> Page Page iSM03111: File (<aaa...a>) in diskarray[] is same as one in diskarray[<c>]. detail=<dd-eeee> Page iSM03113: All control paths of diskarray[<a>] are not available. detail=<bb-cccc> iSM03114: Diskarray[<a>] is already managed by autofind. detail=<bb-cccc> iSM03120: Management of diskarray[<a>] succeeded. name=(<bbb...b>) detail=<cc-dddd> iSM03121: Management of diskarray[<a>] failed. detail=<bb-cccc> Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page iSM03301: SVP failed. name=(<aaa...a>) ip=<bbb...b> detail=<cc-dddd> iSM03302: UDP port is in use. SNMP trap can not be collected. detail=<aa-bbbb> iSM03303: SNMP trap has been available. detail=<aa-bbbb> iSM03400: File access failed. func=<aaa...a> path=<bbb...b> errno=<ccc> detail=<dd-eeee> iSM03410: Socket access failed. func=<aaa...a> errno=<bbb> detail=<cc-dddd> iSM03411: Socket access failed. func=<aaa...a> path=<bbb...b> errno=<ccc> detail=<dd-eeee> iSM03420: Memory access failed. func=<aaa...a> errno=<bbb> detail=<cc-dddd> iSM03430: System call error occurred. func=<aaa...a> errno=<bbb...b> detail=<cc-dddd> iSM03440: iSMmknod is running. detail=<aa-bbbb> iSM03441: iSMmknod is not yet executed. detail=<aa-bbbb> iSM03442: iSMvollist is running. detail=<aa-bbbb> iSM03500: Internal error occurred. detail=<aa-bbbb> iSM04000 iSM04020: Function Error has occurred name=<aaa...a> code=<bbbbb> errno=<ccccc> iSM04021: Internal Error has occurred code=<aaaaa> errno=<bbbbb> iSM04022: Message send error has occurred process=<aaa...a> reason=<bbb> iSM04023: File write error has occurred file=<aaa...a> iSM04024: File read error has occurred file=<aaa...a> iSM04025: File open error has occurred file=<aaa...a> iSM04030: Last message repeated <aaa> times iSM04040: Log File has swapped. The latest backup=<aa> iSM04060: Log File write started host=<aaa...a> iSM06000 iSM06020: Function Error has occurred name=<aaa...a> code=<bbbbb> errno=<ccccc> iSM06021: Internal Error has occurred code=<aaaaa> errno=<bbbbb> iSM06029: Message driven definition file does not exist. file=<aaa...a> iSM06030: Message driven definition file cannot open. errno=<aaaaa> file=<bbb...b> iSM06031: Message driven definition file cannot read. line=<aaa> errno=<bbbbb> iSM06032: Message driven definition file error. First line is not [SERVER] iSM06033: Message driven definition file error. <aaa...a> overlaps. line=<bbb> iSM06034: Message driven definition file error. First word is not keyword. line=<aaa> iSM06035: Message driven definition file error. = does not exist. line=<aaa> iSM06036: Message driven definition file error. Parentheses are not matched. line=<aaa> iSM06037: Message driven definition file error. <aaa...a> is not defined iSM06038: Message driven definition file error. Exceed 256 bytes. line=<aaa> iSM06039: Message driven definition file error. shell and mail exceeded 10. line=<aaa> iSM06040: Header file cannot open. errno=<aaaaa> iSM06041: Header file cannot read. errno=<aaaaa> iSM06042: Header files mail-body size over 1024 bytes iSM06043: Header file error. First line does not begin with FROM: iSM06044: Header file error. No character following FROM: iSM06045: Header file error. Line exceeds 256 bytes. line=<aaa> iSM06047: SMTP address or port number error iSM06048: POP address or port number error iSM06050: Shell file does not exist. file=<aaa...a> iSM06051: Shell file is not executable. file=<aaa...a> iSM06062: Mail server connect error. name=<aaa...a> code=<bbbbb> errno=<ccccc> iSM06063: Recv error (from mail server). name=<aaa...a> code=<bbbbb> errno=<ccccc> iSM06064: Send error (to mail server). name=<aaa...a> code=<bbbbb> errno=<ccccc> iSM06065: Communication error(mail server). id=<a> send=<bbb...b> recv=<ccc...c> iSM06066: Mail server time out iSM06068: Authentication failed. id=<a> send=<bbb...b> recv=<ccc...c> iSM06070: Message buffer is full. Data lost detected iSM06071: Data lost recovered iSM06080: Definition change is successful iSM06081: Definition change error. Message driven function does not start Page iSM06085: Making directory for message file error. name=<aaa...a> path=<bbb...b> errno=<ccccc> iSM06086: Mail process count over. This message is canceled. msg=<aaa...a> iSM06087: Shell process count over. This message is canceled. msg=<aaa...a> iSM06088: Message driven processing stopped for excess of number of processes was resumed iSM06091: Message driven definition file error. Syntax error existed. line=<aaa> iSM06092: Message driven definition file error. Number of , is not right. line=<aaa> iSM06093: Message driven definition file error. HEADER is not defined iSM06099: Message driven definition file error. id=<a> line=<bbb> Page iSM07000 iSM07021: Resource monitoring stopped. (<aaa...a> productID=<bbbbb> SN=<ccccc>) iSM07022: Resource monitoring stopped for maintenance. (<aaa...a> productID=<bbbbb> SN=<ccccc>) Page Page Page iSM07033: Request to start monitoring resource is accepted. (<aaa...a>) iSM07034: Request to stop monitoring resource is accepted. (<aaa...a>) iSM07035: Retrying to start monitoring resource is started. (<aaa...a>) iSM07092: Collecting information failed. (<aaa...a>) iSM07093: Monitoring function is blockaded. Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page iSM07203: LD ,named <aaa...a>, has renamed to <bbb...b>. (<ccc...c>No=<dddd>h) iSM07204: Name setting has executed with SG file. (<aaa...a>) iSM07205: LD has configured. (<aaa...a>) iSM07206: CHE-Disk has configured.(<aaa...a>) iSM07207: Attribute of PD has changed from <aaaaa> to <bbbbb>. (<ccc...c> No=<dd>h-<ee>h) iSM07208: ACCESS_CONTROL has configured.(<aaa...a>) iSM07211: Renaming Disk Array,named <aaa...a>,is failed. (SN=<bbbbb>) iSM07212: Renaming PORT of <aaa...a> is failed. (No=<bb>h-<cc>h) iSM07213: Renaming LD of <aaa...a> is failed. (No=<bbbb>h) Page iSM07251: Disk Array name <aaa...a> exists in others. (productID=<bbbbb> SN=<ccccc>) iSM07252: PORT name <aaa...a> exists in others. (<bbb...b> No=<cc>h-<dd>h) iSM07253: LD name <aaa...a> exists in others. (<bbb...b> No=<cccc>h) iSM07301: LD_SET,named <aaa...a> was added. (<bbb...b>) iSM07302: LD_SET,named <aaa...a> was deleted. (<bbb...b>) iSM07303: PATH, <aaa...a> was added to LD_SET.(<bbb...b> LD_SET=<ccc...c>) iSM07304: PATH, <aaa...a> was deleted from LD_SET. (<bbb...b> LD_SET=<ccc...c>) iSM07305: Some of LDs were assigned to LD_SET. (<aaa...a> LD_SET=<bbb...b> PATH=<ccc...c>) iSM07306: Some of LDs were assigned to LD_SET. (<aaa...a> LD_SET=<bbb...b>) iSM07307: PATH, <aaa...a> was changed for <bbb...b>. (<ccc...c> LD_SET=<ddd...d>) iSM07309: LD,named <aaa...a>(<bbbb>h) was added to LD_SET. (<ccc...c> LD_SET=<ddd...d>) Page iSM07314: ACCESS_CONTROL function was stopped. (<aaa...a>) iSM07315: LD_SET, named <aaa...a>, has renamed to <bbb...b>. (<ccc...c>) iSM07316: Platform was re-set up. (<aaa...a> LD_SET=<bbb...b>) iSM07331: Adding a LD_SET, named <aaa...a> was failed. (<bbb...b>) iSM07332: Deleting a LD_SET, named <aaa...a> was failed. (<bbb...b>) iSM07333: Adding a PATH, named <aaa...a> to LD_SET was failed. (<bbb...b> LD_SET=<ccc...c>) iSM07334: Deleting a PATH, named <aaa...a> to LD_SET was failed. (<bbb...b> LD_SET=<ccc...c>) iSM07336: Assigning some of LDs, to LD_SET was failed. (<aaa...a> LD_SET=<bbb...b>) Page Page iSM07342: Changing ACCESS_CONTROL mode was failed. (<aaa...a> No=<bb>h-<cc>h) iSM07343: Starting ACCESS_CONTROL function was failed. (<aaa...a>) iSM07344: Stopping ACCESS_CONTROL function was failed. (<aaa...a>) iSM07345: Renaming LD_SET, named <aaa...a> was failed. (<bbb...b>) iSM07346: Re-setup of Platform was failed. (<aaa...a> LD_SET=<bbb...b>) Page Page Page Page Page Page Page Page Page Page Page Page iSM07501: Request is meaningless(already) iSM07503: Resource table is re-created iSM07504: Entry is not found iSM07505: Service stopped iSM07506: Request cancel iSM07507: Disk array is not watched iSM07509: Disk array is busy(retype later) iSM07511: Control path failed iSM07512: Specified disk array is not managed iSM07513: Disk array is busy(configuration) iSM07550: Program error has occurred. (code=<aaa...a>) iSM07551: Time out has occurred. (code=<aaa...a>) iSM07552: Invalid parameter has detected. (code=<aaa...a>) iSM07553: Process killed iSM07554: Internal communication error has occurred. (code=<aaa...a>) iSM07555: System call error has occurred. [func=<aaa...a> errno=<bbb...b>] (code=<ccc...c>) iSM07556: Insufficient resource has detected. (code=<aaa...a>) iSM07557: This function is not supported iSM07601: Attribute of LD has configured. (<aaa...a>) iSM07602: LD movement terminated. (<aaa...a>) Page Page Page Page Page Page Page iSM07981: Message output failed (<aaa...a>) iSM08000 iSM08020: Disk array=<aaa...a> logging is started interval=<bb> iSM08021: Disk array=<aaa...a> logging is stopped iSM08022: Disk array=<aaa...a> logging interval has changed interval=<bb> iSM08030: Disk array=<aaa...a> logging is already started iSM08031: Disk array=<aaa...a> logging is already stopped iSM08032: Disk array=<aaa...a> is not monitored iSM08033: Disk array=<aaa...a> does not exist iSM08034: There is no disk array iSM08035: Disk array=<aaa...a> logging is started(overload) interval=<bb> iSM08036: Disk array=<aaa...a> is overload iSM08037: Disk array=<aaa...a> is overload limit=<bbbb> residual=<cccc> iSM08051: Performance monitoring overhead exceeds permissible amount (disk array=<aaa...a>) Page Page Page iSM08061: Psl file sequence number is over max value iSM08062: Psl file name is over max value iSM08063: Psl file already exist (disk array= <aaa...a> file=<bbb...b>) iSM08070: Make directory failed dirname=<aaa...a> errno=<bbbb> detcode=<cccccccc> Page iSM08093: Failed in communication with <aaaa> [func=<bbb...b>] [errno=<cccc>] detcode=<dddddddd> iSM08094: System call error occurred func=<aaa...a> errno=<bbbb> detcode=<cccccccc> iSM08099: Program error occurred detcode=<aaaaaaaa> iSM08180: Accept new display refresh rate(<a> times/minute old=) iSM08181: Specified value is the same as current value(<a> times/minute) iSM08182: Cant change display refresh rate(<aaa...a>:<bbb...b>) iSM08183: Specified value is not allowed as display refresh rate(<a> times/minute) Page iSM09000 iSM09003: LD movement from <aaaa>(<bbb...b>) to <cccc>(<ddd...d>) in <eee...e> <fff...f> Page Page Page Page iSM09013: To get subsystem information failed from disk array=<aaa...a> detcode=<bbbbbbbb> iSM09015: Illegal LD movement information was received from <aaa...a> Page Page Page iSM09099: Program error occurred detcode=<aaaaaaaa> iSM09101: Bsl file open failed func=<aaa...a> errno=<bbbb> detcode=<cccccccc> filename=<ddd...d> Page Page iSM09108: Bsl file re-created (illegal format detected detcode=<aaaaaaaa>) iSM10000 iSM10001: comm error: main sc=<aaa>h ec=<bbb...b>h iSM10002: comm error: main sc=<aaa>h ec=<bbb...b>h iSM10020: sys error: main sc=<aaa>h ec=<bbb...b>h iSM10040: func error: main sc=<aaa>h ec=<bbb...b>h iSM10100: comm error: Agent sc=<aaa>h ec=<bbb...b>h iSM10101: comm error: Agent sc=<aaa>h ec=<bbb...b>h iSM10102: comm error: Agent sc=<aaa>h ec=<bbb...b>h iSM10103: sys error: Agent sc=<aaa>h ec=<bbb...b>h iSM10104: func error: Agent sc=<aaa>h ec=<bbb...b>h iSM10106: DiskArrayName(=<aaa...a>) has changed iSM10200: comm error: client sc=<aaa>h ec=<bbb...b>h iSM10201: comm error: client sc=<aaa>h ec=<bbb...b>h iSM10210: comm error: client sc=<aaa>h ec=<bbb...b>h iSM10220: sys error: client sc=<aaa>h ec=<bbb...b>h iSM10302: command: <aaa...a>, <bbb...b>, status=failed (<cc>h/<dd>h/<ee>h) iSM10303: command: <aaa...a>, volume= <bbbb>h <ccc...c>, status=failed (<dd>h/<ee>h/<ff>h) iSM10305: command: <aaa...a>, <bbb...b>, status=failed (ec=<ccc...c>) iSM10306: command: <aaa...a>, volume=<bbbb>h <ccc...c>, status=failed (ec=<ddd...d>) iSM10307: command: <aaa...a>, <bbb...b>=<ccc...c>(<dddd>h) <eee...e>, status=failed(ec=<fff...f>) Page iSM10310: command: <aaa...a>, <bbb...b>= <ccc...c> (<dddd>h) <eee...e> iSM10311: command: <aaa...a>, <bbb...b> Page Page Page iSM10317: command: <aaa...a>, LD=<bbb...b> (<cccc>h) <ddd...d>, mode=<eee...e> Page Page iSM10322: command: <aaa...a>, ATgroup=<bbb...b> <ccc...c>, LD=<ddd...d>(<eeee>h) Page iSM10324: ATgroup deleted: ATgroup=<aaa...a> <bbb...b>, classification=<ccc...c> Page iSM10330: inconsistency of product revision of diskarray: mv=<aaa...a>, rv=<aaa...a> Page Page Page Page iSM10402: link error:Disk Array=<aaa...a>, linkno=<bbb...b>, portno=<ccc...c>, state=<ddd...d>h iSM10410: comm error:report sc=<aaa>h, ec=<bbb...b>h iSM10411: comm error:report event type=<aaaaaaaa>h, ec=<bbb...b>h iSM10420: comm error:report sc=<aaa>h, ec=<bbb...b>h iSM10430: sys error:report sc=<aaa>h, ec=<bbb...b>h iSM10440: func error:report sc=<aaa>h, ec=<bbb...b>h iSM10501: command option error:option=<aaaaaa>, status=<bbb...b> iSM10502: command not execute:status=<aaa...a> iSM10503: array state error:status=<aaa...a> iSM10504: acquire information error:status=<a> iSM10505: data output file error:action=<aaaaa>, status=<bbb...b> Page iSM11000 Page Page iSM11109: <aaa...a> was terminated. iSM11110: Command completed abnormally. iSM11151: Failed to get information or set configuration. (<aaa...a>) iSM11152: Failed to output Log Message. Page Page iSM11171: PD group doesnt exist. iSM11172: RANK doesnt exist. iSM11173: LD doesnt exist. iSM11174: PD doesnt exist. iSM11175: PORT doesnt exist. iSM11176: Permitted PORT for LD doesnt exist. iSM11178: LD Set doesnt exist. iSM11179: LD Set doesnt match. iSM11180: Specified option is not supported by specified disk array subsystem. iSM11182: Pool doesnt exist. iSM11183: Snapshot Pool doesnt exist. iSM11184: Snapshot LD doesnt exist. iSM11220: Port #<aa>h-<bb>h was selected. iSM11221: View Host Permit List was selected. iSM11222: View LD Assign List was selected. iSM11230: Access Control is not supported. Page iSM11234: Corresponding LD is not found. iSM11235: Effective LD without being in List. iSM11236: Setting over this ineffective. iSM11237: Selected port is not supported because protocol is difference. iSM11240: PDG #<aa>h was selected. iSM11241: Cannot set up LD, because number of PD is not sufficient. iSM11242: All settings are cleared. iSM11250: Cannot execute Autobind, because LD has already been bound. iSM11251: Failed to open a file. iSM11252: Succeeded in loading a file. iSM11253: Illegal file parameter. iSM11255: Cannot bind LD by specified parameter. iSM11257: Succeeded in saving a file. iSM11258: Failed to save a file. iSM11300: This program configures Disk Array Subsystem. Page Page iSM11320: LD capacity which is bound will be <aa> MB. iSM11321: System space of 2MB is added to LD, and LD is bound. iSM11322: The address which can be specified is <aaaa>h or <bbbb>h. Page iSM11361: Specified LD is not found. iSM11362: Failed to bind RANK. iSM11363: Failed to bind some RANKs. iSM11364: Failed to bind Hot Spare. iSM11365: Specified PD doesnt exist. iSM11366: Specified RANK doesnt exist. iSM11367: Specified Hot Spare doesnt exist. iSM11369: Specified F/W file is not conformable to the target Disk Array. iSM11370: Failed to read F/W file. iSM11372: Disk Array Subsystem is not found. iSM11373: Specified F/W file is not conformable to the target resource F/W. iSM11374: <a> RANKs were bound successfully. But some RANKs failed to bind. Page iSM11378: Not enough space to bind LD. iSM11379: Not enough space to bind LD. Only <aa> LDs be able to be bound. iSM11380: Failed to allocate a memory space. iSM11381: Failed to bind LD. iSM11382: <aa> LDs was bound successfully. But some LDs failed to bind. iSM11383: Succeeded in downloading of the following <aaa...a>. <bbbb>(hex) :<cc, cc> iSM11384: Failed to download F/W of <aaa...a>. Page iSM11405: Cannot bind SPARE by specified parameter. (<aaa...a>) iSM11406: Cannot bind RANK by specified parameter. (<aaa...a>) iSM11407: LD format time was selected. iSM11408: RANK rebuilding was selected. (<aaa...a>) iSM11409: Cross call was selected. (<aaa...a>) iSM11410: Subsystem control mode was selected. (<aaa...a>) iSM11412: Expand lun was selected.(<aaa...a>) iSM11413: Illegal firmware file size. iSM11414: Cannot open a firmware file. iSM11415: Illegal resource type was selected. iSM11416: Firmware download was selected. (<aaa...a>) iSM11417: Target PD doesnt exist in specified Disk Array Subsystem. Page Page iSM11426: LD unbind was selected. (<aaa...a>) iSM11429: RANK is not found in specified PDG. (<aaa...a>) iSM11431: Auto repair was selected. (<aaa...a>) iSM11438: Cannot execute with specified RANK capacity. iSM11439: LD ownership was selected. (<aaa...a>) iSM11440: Dynamic capacity expansion was selected. (<aaa...a>) iSM11442: RANK bind custom was selected. (<aaa...a>) iSM11443: RANK bind standard was selected. (<aaa...a>) iSM11444: RANK unbind was selected. (<aaa...a>) iSM11455: Temp. sense interval was selected. iSM11486: Failed to execute the firmware download. (<aaa...a>) iSM11487: The resource that F/W is downloaded to may be not present. (<aaa...a>) iSM11501: LD information was selected. iSM11502: LD No./Name information was selected. iSM11503: RANK information was selected. iSM11504: RANK/PD information was selected. iSM11505: PD information was selected. iSM11506: RANK map information was selected. iSM11507: PD recovery history init. was selected. iSM11508: Media error list init. was selected. iSM11509: Subsystem view current setting was selected. iSM11510: Maintenance view current setting was selected. iSM11521: PD recovery history doesnt exist. Page iSM11533: LD list information option was selected. (<aaa...a>) iSM11534: LD detail information option was selected. (<aaa...a>) iSM11535: PD list information option was selected. (<aaa...a>) iSM11536: PD detail information option was selected. (<aaa...a>) iSM11537: Port information with LD key option was selected. (<aaa...a>) iSM11538: LD information with port key option was selected. (<aaa...a>) iSM11539: Controller information option was selected. (<aaa...a>) iSM11540: Enclosure information option was selected. (<aaa...a>) iSM11542: Enclosure resource doesnt exist. (<aaa...a>) iSM11543: Port information option was selected. (<aaa...a>) iSM11544: Specified Resource does not exist. iSM11545: Cache doesnt exist. iSM11546: Cache segment does not exist. iSM11548: Volume list data is not found. iSM11549: Cannot make or refresh volume list data. iSM11557: Only root can use this option. iSM11561: Rebuild option was selected. (<aaa...a>) iSM11562: Spare Rebuild option was selected. (<aaa...a>) iSM11563: iSMrepair was executed. iSM11564: PD Group Number was too large. iSM11565: PD Number was too large. iSM11566: RANK Number was too large. iSM11567: PD Group Number is different. iSM11568: RANK list information option was selected. Page iSM11572: All information option was selected. iSM11573: Controller detail information option was selected. (<aaa...a>) iSM11574: Enclosure detail information option was selected. (<aaa...a>) Page Page Page Page iSM11601: Failed to communicate. iSM11602: Failed to set Log output environment. iSM11603: Only an Administrators group can execute. iSM11604: Specified directory does not exist. iSM11605: Please wait a minute. iSM11700: Please wait a minute. iSM11701: Volume list is created successfully. iSM11702: Failed to make volume list data. iSM11703: Option is insufficient. iSM11704: Specified option are duplicated. iSM11705: Options which can not control are specified. iSM11706: Too many options are specified. iSM11707: Combination of options is illegal. iSM11708: Form of parameter is illegal. iSM11709: Parameter is too long. iSM11710: Conflict of volume list data has been detected. Please update volume list data. Page iSM11721: Disk Array does not exist in volume list data. iSM11722: Volume does not exist in volume list data. iSM11723: Specified ld_number does not exist in volume list data. iSM11724: Specified ld_name does not exist in volume list data. iSM11725: Specified drive does not exist in volume list data. iSM11726: Specified disk_number does not exist in volume list data. iSM11727: Specified HBT does not exist in volume list data. iSM11728: Specified HBT or LUN does not exist in volume list data. iSM11729: Specified Disk Array information does not exist in volume list data. iSM11730: Failed to get the specified Disk Array information. iSM11731: Specified Disk Array is not supported. iSM11732: Specified Volume Name does not exist in volume list data. iSM11733: Failed to initialize an ODM session. iSM11734: Failed to terminate an ODM session. iSM11735: Failed to retrieve objects from ODM. iSM11736: Failed to write target-control volume list data. iSM11737: Failed to get control volume definitions. iSM11738: Failed to get target volume definitions. iSM11739: Failed to get control volume list data. Page Page iSM11749: Control volume is not found. iSM11750: Failed to execute popen. Page iSM11756: Illegal OS version iSM11757: SCSI path-through driver is not installed. iSM11758: System call error (error code=<aaa>) iSM11759: Failed to open control volume in Diagnostic mode. iSM11760: Volume list data is locked by another process. iSM11781: Failed to open volume list data. iSM11782: Failed to close volume list data. iSM11783: Failed to read volume list data. iSM11784: Failed to write volume list data. iSM11785: Failed to seek volume list data. iSM11786: Failed to copy volume list data. iSM11787: Failed to rename volume list data. iSM11791: Failed to read directory. iSM11792: Failed to make directory. iSM11793: Failed to query device. iSM11794: Failed to open scsi device. iSM11795: Failed to get OS version. iSM11796: Failed to allocate a memory space. iSM11797: Target device does not exist. iSM11799: Failed to execute system function. iSM11801: Failed to create log files. iSM11802: Started to get <aaa...a> log. iSM11803: Succeed to get <aaa...a> log. iSM11804: Failed to get <aaa...a> log. iSM13000 iSM13200: <aaa...a> iSM13201: Replicate Start <aaaa/bb/cc> <dd:ee:ff> MV:<ggg...g> RV:<ggg...g> iSM13202: Replicate Normal End <aaaa/bb/cc> <dd:ee:ff> MV:<ggg...g> RV:<ggg...g> iSM13203: Replicate Abnormal End <aaaa/bb/cc> <dd:ee:ff> MV:<ggg...g> RV:<ggg...g> iSM13204: Restore Start <aaaa/bb/cc> <dd:ee:ff> MV:<ggg...g> RV:<ggg...g> iSM13205: Restore Normal End <aaaa/bb/cc> <dd:ee:ff> MV:<ggg...g> RV:<ggg...g> iSM13206: Restore Abnormal End <aaaa/bb/cc> <dd:ee:ff> MV:<ggg...g> RV:<ggg...g> iSM13207: Separate Start <aaaa/bb/cc> <dd:ee:ff> MV:<ggg...g> RV:<ggg...g> iSM13208: Separate Normal End <aaaa/bb/cc> <dd:ee:ff> MV:<ggg...g> RV:<ggg...g> iSM13209: Separate Abnormal End <aaaa/bb/cc> <dd:ee:ff> MV:<ggg...g> RV:<ggg...g> iSM13210: Change Start <aaaa/bb/cc> <dd:ee:ff> MV:<ggg...g> RV:<ggg...g> iSM13211: Change Normal End <aaaa/bb/cc> <dd:ee:ff> MV:<ggg...g> RV:<ggg...g> iSM13212: Change Abnormal End <aaaa/bb/cc> <dd:ee:ff> MV:<ggg...g> RV:<ggg...g> iSM13213: Wait Abnormal End <aaaa/bb/cc> <dd:ee:ff> MV:<ggg...g> RV:<ggg...g> iSM13214: These targets have already replicated. MV:<aaa...a> RV:<aaa...a> iSM13215: These targets have already separated. (<aaa...a>) MV:<bbb...b> RV:<bbb...b> iSM13216: These targets have already restored. MV:<aaa...a> RV:<aaa...a> iSM13218: <aaa...a> <bbb...b> iSM13219: <aaa...a> return=<bbb...b> <ccc...c> Page iSM13224: MV is restored. Volume Name:<aaa...a> Mount Point:<bbb...b> iSM13225: Flush Start <aaaa/bb/cc> <dd:ee:ff> iSM13226: Flush Normal End <aaaa/bb/cc> <dd:ee:ff> iSM13227: Flush Abnormal End <aaaa/bb/cc> <dd:ee:ff> iSM13228: Scan Start <aaaa/bb/cc> <dd:ee:ff> iSM13229: Scan Normal End <aaaa/bb/cc> <dd:ee:ff> iSM13230: Scan Abnormal End <aaaa/bb/cc> <dd:ee:ff> iSM13231: Writing signature succeeded. volume=<aaa...a> Page iSM13238: Freeze of database is started. <aaaa>/<bb>/<cc> <dd>:<ee>:<ff> iSM13239: All of database were thawed. <aaaa>/<bb>/<cc> <dd>:<ee>:<ff> iSM13240: SnapshotBackup Start <aaaa>/<bb>/<cc> <dd>:<ee>:<ff> iSM13241: SnapshotBackup Normal End <aaaa>/<bb>/<cc> <dd>:<ee>:<ff> iSM13242: SnapshotBackup Abnormal End <aaaa>/<bb>/<cc> <dd>:<ee>:<ff> iSM13243: SnapshotRestore Start <aaaa>/<bb>/<cc> <dd>:<ee>:<ff> Page Page iSM13251: Create Start <aaaa/bb/cc> <dd:ee:ff> iSM13252: Create Normal End <aaaa/bb/cc> <dd:ee:ff> iSM13253: Create Abnormal End <aaaa/bb/cc> <dd:ee:ff> iSM13254: Delete Start <aaaa/bb/cc> <dd:ee:ff> iSM13255: Delete Normal End <aaaa/bb/cc> <dd:ee:ff> iSM13256: Delete Abnormal End <aaaa/bb/cc> <dd:ee:ff> Page Page Page Page Page iSM13410: These targets have restored. MV:<aaa...a> RV:<aaa...a> ccc...c>) iSM13411: Specified target is suspended. iSM13412: Target pairs copy mode is background. Page Page Page iSM13500: Insufficient option. (<aaa...a>) iSM13501: Specified options are duplicated. (<aaa...a>) iSM13502: Options which can not be omitted are specified. (<aaa...a>) iSM13503: Too many options are specified. (<aaa...a>) iSM13504: Illegal combination of options. (<aaa...a>) iSM13505: Illegal control option. iSM13506: Illegal mvflg type. (<aaa...a>) iSM13507: Illegal rvflg type. (<aaa...a>) iSM13508: Illegal cprange type. (<aaa...a>) iSM13509: Illegal cpmode type. (<aaa...a>) iSM13510: Illegal rvacc type. (<aaa...a>) iSM13511: Illegal force type. (<aaa...a>) iSM13512: Illegal copy mode. iSM13513: Volume (<aaa...a>) does not exist in volume list. iSM13514: Volume name is too long. (<aaa...a>) iSM13515: Number of MV is too many. iSM13516: Number of RV is too many. Page Page Page iSM13524: No such file filename=<aaa...a> errno=<bbb> iSM13525: Illegal file type filename=<aaa...a> iSM13526: File open error occurred. filename=<aaa...a> errno=<bbb> iSM13527: Illegal character is included. filename=<aaa...a> line=<bbb...b> iSM13528: Line has too many characters. filename=<aaa...a> line=<bbb...b> iSM13529: Illegal rvdata type. (<aaa...a>) ccc...c>) iSM13530: Illegal MV type is specified. filename=<aaa...a> line=<bbb...b> iSM13531: Illegal iopath type. (<aaa...a>) ccc...c>) iSM13532: Illegal RV type is specified. filename=<aaa...a> line=<bbb...b> Page Page Page iSM13540: Illegal volflg type (<aaa...a>) iSM13541: Semi-sync mode is not available to DynamicDataReplication. iSM13542: Specified targets are not paired. Page iSM13545: Illegal site type. (<aaa...a>) ccc...c>) iSM13547: Specified partition does not exist. iSM13548: Making MV& RV device list failed. iSM13549: Failed to replicate. iSM13550: Failed to restore. iSM13551: Failed to separate. iSM13552: Failed to change. Page iSM13555: Checking status failed. (detail error code=<aaa>) iSM13556: SCSI I/O error has occurred. iSM13557: SCSI open has failed. iSM13558: SCSI close has failed. Page iSM13562: RV is omitted. iSM13563: System call error (error code=<aaa>) iSM13564: This connection does not allow replicating & restoring at the same time. iSM13565: Upper pair is not separated. iSM13566: Lower pair is not separated. iSM13567: Specified Disk Arrays status is freeze. Page Page Page Page Page iSM13575: Unexpected error occurred. iSM13576: Targets may not be a pair, or unexpected error occurred. iSM13577: These targets are replicating now. MV:<aaa...a> RV:<aaa...a> ccc...c>) Page Page Page iSM13584: Not enough memory (<aaa...a>) errno=<bbb> iSM13585: Volume list is missing or unexpected error occurred. error code=<aa> Page Page Page Page Page iSM13597: DynamicDataReplication is not supported. iSM13598: RemoteDataReplication is not supported. iSM13599: License for this command is locked. iSM13600: Specified drive has multiple partitions/extents. iSM13601: Specified drive is not basic disk. iSM13602: Specified partitions is not primary/extended partition. iSM13603: Partition that specified drive character assigned has multiple partitions/extents. iSM13604: Specified partition does not exist. iSM13605: Specified drive number does not exist. Page iSM13607: Specified disk type is not supported. iSM13607: Specified drive type is not supported. iSM13608: Specified partition has already mounted. iSM13609: Access of specified disk was refused. iSM13610: Illegal drive number is specified. iSM13611: RemoteDataReplication/Disaster Recovery is not supported. bbb...b>) Page iSM13614: Failed to read signature. iSM13614: Failed to read signature. volume=<aaa...a> iSM13615: Failed to read signature map file. errno=<aaa> Page Page iSM13623: Signature file access has failed. filename=<aaa...a> errno=<bbb> iSM13624: Specified volume has no mount point. bbb...b>) iSM13625: Specified volume has more than one mount point. bbb...b>) iSM13626: Signature file format is illegal. filename=<aaa...a> iSM13627: Specified volumes signature does not exist in file. filename=<aaa...a> iSM13629: Too long file name is specified. iSM13630: Specified disk is read only. iSM13631: Failed to mount. iSM13632: Failed to umount. iSM13633: Failed to flush. Page iSM13637: Specified path (<aaa...a>) is not correct directory. iSM13638: This OS version does not support specified function. Page iSM13642: Popen (ps command) has failed. iSM13644: Failed to scan devices. Page iSM13646: Specified mv volume is mounted. path=<aaa...a> iSM13647: These targets are not replicating now. MV:<aaa...a> RV:<aaa...a> iSM13648: These targets are not separating now. MV:<aaa...a> RV:<aaa...a> iSM13649: These targets are not restoring now. MV:<aaa...a> RV:<aaa...a> iSM13650: Target pair is a member of ATgroup. MV=<aaa...a> RV=<aaa...a> ccc...c>) Page Page Page Page Page Page Page Page Page iSM13664: Wait command has terminated because ATgroup Sync State is changed by other process. bbb...b>) Page Page iSM13675: Failed to umount of metafile volume. iSM13676: Failed to sql server connection. iSM13677: Backup set name is too long. (<aaa...a>) ccc...c>) iSM13678: Description is too long. (<aaa...a>) ccc...c>) iSM13679: Illegal remod type. (<aaa...a>) iSM13680: Illegal refile name. (<aaa...a>) iSM13681: Specified volume differs from database volume. bbb...b>) iSM13682: Failed to VDI initialization. iSM13683: No authority to access database. iSM13684: Failed to get database name list. iSM13685: Failed to sql connection initialization. iSM13686: Failed to metafile (<aaa...a>) creation. iSM13687: Metafile(<aaa...a>) is not found. iSM13688: Failed to metafile(<aaa...a>) open. iSM13689: Failed to snapshot execution. code=<aaa...a> iSM13690: Failed to sql command execution. iSM13691: Dbname does not exist in SQL server. iSM13692: Specified volume has multiple databases. iSM13693: Metafile is existing in the same volume as the database. iSM13694: Database (<aaa...a>) is being used in another process. iSM13695: Failed to detach database. iSM13696: Failed to get database volume from metafile. iSM13697: Not found database file. Page Page Page Page Page Page Page Page Page Page Page iSM13728: Failed to execute command. (part of targets) Page Page Page iSM13738: Target-control volume list data has invalid data. iSM13739: Control volume is not found. iSM13740: Failed to open control volume in Diagnostic mode. Page Page Page Page Page Page Page iSM13755: Command issue to <aaa...a> failed. ccc...c>) iSM13761: Illegal bvflg type. (<aaa...a>) ccc...c>) Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page iSM13825: Specified iopath is not supported. bbb...b>) Page Page Page Page Page iSM14000 iSM14400: Information sense error : info=<aaa...a>, status=failed (<bbb...b>) iSM14401: Configuration reserved. : Disk Array=<aaa...a>, status=<bbb...b> iSM14402: Configuration released. : Disk Array=<aaa...a>, status=<bbb...b> iSM14403: LD bind : LDN=<aaaa>h, <aaaa>h..., RANK=<bb>h, <bb>h..., PDG=<cc>h, status=<ddd...d> iSM14404: LD unbind : LDN=<aaaa>h, <aaaa>h..., status=<bbb...b> iSM14406: RANK unbind : RANK=<aa>h, <aa>h..., PDG=<bb>h, status=<ccc...c> iSM14408: SPARE bind : PDN=<aa>h, <aa>h..., PDG=<bb>h, status=<ccc...c> iSM14409: SPARE unbind : PDN=<aa>h, <aa>h..., PDG=<bb>h, status=<ccc...c> iSM14410: Set ownership : LDN=<aaaa>h, <aaaa>h..., <bbbb>, status=<ccc...c> iSM14411: Cross call : mode=<aaa>, status=<bbb...b> iSM14412: Set Disk Array time : <aaa...a>, Disk Array=<bbb...b>, status=<ccc...c> iSM14413: Rebuild(maintenance) : RANK=<aa>h, PDN=<bb>h, PDG=<cc>h, Time=<dd>, status=<eee...e> iSM14414: Forced Reduce(maintenance) : RANK=<aa>h, PDN=<bb>h, PDG=<cc>h, status=<ddd...d> iSM14415: Preventive Reduce(maintenance) : RANK=<aa>h, PDN=<bb>h, PDG=<cc>h, status=<ddd...d> iSM14417: Set Rebuild time(maintenance) : RANK=<aa>h, PDG=<bb>h, Time=<cc>h, status=<ddd...d> iSM14418: Auto repair mode : mode=<aaa>, status=<bbb...b> iSM14419: Temp. sense interval(maintenance) : interval=<aaaaa>, status=<bbb...b> iSM14421: Disk Array log init(maintenance) : status=<aaa...a> iSM14422: Media error list init(maintenance) : RANK=<aa>h, PDG=<bb>h, status=<ccc...c> iSM14423: PD recovery report init(maintenance) : status=<aaa...a> iSM14424: Set SPARE mode : mode=<aaa>, status=<bbb...b> iSM14425: Set write cache mode(maintenance) : <aaa>mode=<bbb>, status=<ccc...c> iSM14426: RANK rebuild time : RANK=<aa>h, PDG=<bb>h, Time=<cc>, status=<ddd...d> iSM14427: LD format time: Time=<aa>, status=<bbb...b> iSM14428: Auto assignment mode: mode=<aaa>, status=<bbb...b> iSM14429: Expand LUN mode: HD=<aa>h, Port=<bb>h, mode=<cc>, status=<ddd...d> iSM14430: Set LD reserve ( ): LDN=<aaaa>h, <aaaa>h..., status=<bbb...b> iSM14431: Cancel LD reserve ( ): LDN=<aaaa>h, <aaaa>h..., status=<bbb...b> iSM14432: Start data initialize : LDN=<aaaa>h, <aaaa>h..., status=<bbb...b> iSM14433: Stop data initialize : LDN=<aaaa>h, <aaaa>h..., status=<bbb...b> iSM14434: Change data initialize time : Time=<aa>, status=<bbb...b> iSM14435: Set LD reserve (optimization) : LDN=<aaaa>h, <aaaa>h..., status=<bbb...b> iSM14436: Cancel LD reserve (optimization) : LDN=<aaaa>h, <aaaa>h..., status=<bbb...b> iSM14437: Set default LD name : LDN=<aaaa>h, status=<bbb...b> iSM14438: Set Port Platform : Platform=<aa>, HD=<bb>h, Port=<cc>h, status=<ddd...d> iSM14439: Shutdown Disk Array : status=<aaa...a> iSM14440: <aaa> Control Software update : status=failed iSM14441: Storage Control Software update : status=<aaa...a> iSM14442: Reset resource : resource=<aaa>, number=<bb>h, status=<ccc...c> Page Page Page iSM14447: License <aaaa> : Product=<bbb...b>, status=<ccc...c> Page Page iSM14450: Set CachePartitioning mode: mode=<aaa> initialize=<bbbb>, status=<ccc...c> Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page iSM14474: SRA threshold : Pool number=<aaaa>h, threshold=<bbb...b>GB (<cc>%), status=<ddd...d> iSM14475: Configuration reserved(reference mode). : Disk Array=<aaa...a>, status=<bbb...b> iSM14476: Configuration released(reference mode).: Disk Array=<aaa...a>, status=<bbb...b> iSM14600: Internal error : detail=<aaa...a>, code=<bbbb> iSM14601: Forced termination : status=<aaa...a> iSM15000 iSM15600: Internal error : detail=<aaa...a>, code=<bbbb> iSM16000 ~ iSM16001: iSMalived process has started. function=<aaa...a> AUTH=<bbb...b> iSM16020: Function Error has occurred. name=<aaa...a> code=<bbbb> errno=<ccc> iSM16021: Internal Error has occurred. code=<aaaa> errno=<bbb> iSM16029: File does not exist. file=<aaa...a> iSM16030: File cannot be opened. errno=<aaa> file= <bbb...b> iSM16031: File cannot be read. file=alived.conf line=<aa> errno=<bbb> iSM16032: Illegal configuration. file=alived.conf First line is not [ALIVE]. Page iSM16035: Illegal configuration. file=alived.conf id=<a> line=<bb> iSM16037: Illegal configuration. file=alived.conf Specific tag is not defined. tag=<aaa...a> iSM16038: Illegal configuration. file=alived.conf It has exceeded 256 bytes. line=<aa> iSM16039: Illegal configuration. file=alived.conf TO mail address has exceeded 10. line=<aa> iSM16041: File cannot be read. file=alived.tbl line=<aa> errno=<bbb> Page iSM16045: Illegal configuration. file=alived.tbl id=<a> line=<bb> iSM16047: Illegal configuration. file=alived.tbl Specific tag is not defined. tag=<aaa...a> iSM16048: Illegal configuration. file=alived.tbl It has exceeded 256 bytes. line=<aa> iSM16049: Illegal configuration. file=alived.tbl Message number has exceeded 1000. line=<aa> iSM16061: Mail server (<aaa...a>) address is illegal. iSM16062: Mail server cannot be connected. name=<aaa...a> code=<bbbb> errno=<ccc> iSM16063: Communication error(receive from mail server). name=<aaa...a> code=<bbbb> errno=<ccc> iSM16064: Communication error(send to mail server). name=<aaa...a> code=<bbbb> errno=<ccc> iSM16065: Communication error(mail server). id=<a> send=<bbb...b> recv=<ccc...c> iSM16066: Mail server was time out. iSM16070: Message buffer is full. Data losing is detected. iSM16071: Data losing is recovered. iSM16080: Definition change is successful. function=<aaa...a> AUTH=<bbb...b> iSM16081: Definition change error. ALIVEmail function does not start. Page iSM17000 Page iSM17010: File access has failed. func=<aaa...a> path=<bbb...b> errno=<ccc> detail=<dd-eeee> iSM17020: Socket access has failed. func=<aaa...a> errno=<bbb> detail=<cc-dddd> iSM17030: Memory access has failed. func=<aaa...a> errno=<bbb> detail=<cc-dddd> iSM17040: System call error has occurred. func=<aaa...a> errno=<bbb> detail=<cc-dddd> iSM17050: Internal error has occurred. detail=<aa-bbbb> iSM18000 Page iSM18005: Snapshot has been restored. (<aaa...a>, BV=<bbb...b> (<cccc>h), SV=<ddd...d> (<eeee>h)) iSM18006: SV guard was changed. (<aaa...a>, SV=<bbb...b> (<cccc>h), mode=<dd>) Page Page Page iSM18205: Monitoring stopped. (<aaa...a>) iSM18301: System call error has occurred. (func=<aaa...a>, code=<bbb...b>, errno=<cccc>) iSM18302: Internal error has occurred. (code=<aaa...a>) iSM18303: Parameter error has occurred. (code=<aaa...a>) iSM18311: Internal communication error has occurred. (code=<aaa...a>) iSM18321: Access to diskarray was failed. (<aaa...a>, code=<bbb...b>, <ccc...c>) Page Page Page Page iSM19000 iSM19000: <aaa...a> iSM19010: iSMsc_create has normally terminated. iSM19011: iSMsc_create has normally terminated. [BV:<aaa...a>] [SV:<bbb...b>] iSM19012: iSMsc_create has abnormally terminated. Page Page Page iSM19034: iSMsc_restore has accepted the request. iSM19035: iSMsc_restore has accepted the request. [BV:<aaa...a>] [SV:<bbb...b>] iSM19100: The volume under restoration cannot be specified. [BV:<aaa...a>] iSM19101: The volume linked from LV cannot be specified. [{BV|SV}:<aaa...a>] iSM19102: The volume mounted cannot be specified. [BV:<aaa...a>] iSM19103: State of specified diskarray is 'freeze'. Page iSM19107: State of SV's access mode is invalid. (mode=<aaa...a>) [SV:<bbb...b>] iSM19108: The volume under deletion exists. [BV:<aaa...a>] iSM19109: The volume linked from LV exists. [SV:<aaa...a>] iSM19110: The volume of SV guard exists. [SV:<aaa...a>] iSM19111: Version of API is invalid. iSM19112: Specified volume is wrong. [{BV|SV}:<aaa...a>] iSM19113: Volume list does not exist. iSM19114: License for snapshot is locked. iSM19115: Snapshot function is not supported with this volume. iSM19116: Specified drive number does not exist. iSM19117: Specified drive type is not supported.(type=<aaa...a>) iSM19118: Specified volume does not exist in volume list. [{BV|SV}:<aaa...a>] iSM19119: Volume list data is locked by another process. Page iSM19123: The volume which is not recognized cannot be specified. [BV:<aaa...a>] iSM19124: SV of snap/inactive is already exist. iSM19125: Snapshot has been nullified. iSM19126: Specified SV has been deleted. [SV:<aaa...a>] iSM19127: Request has already completed. iSM19200: Mandatory option was not specified. (<aaa...a>) iSM19202: Illegal option value was specified. (<aaa...a>) iSM19203: Number of BV and SV was not equal. iSM19208: Illegal configuration was detected. (file=<aaa...a>,line=<bbb...b>) iSM19209: Illegal option value was detected.(file=<aaa...a>,line=<bbb...b >) iSM19210: Number of BV and SV was not equal. (file =<aaa...a>,line=<bbb...b>) iSM19212: Duplicated targets were detected. (file=<aaa...a>,line=<bbb...b> ) iSM19213: Illegal volume flag was specified to be (<aaa...a>) option.(manager specification) iSM19301: The unexpected error has occurred in iSM/Server. (code=aaa...a/bb/ccc...c) iSM19302: Specified Diskarray does not exist. iSM19303: State of Diskarray includes specified volume is not monitoring. iSM19304: Timeout error has occurred in iSM/Server. Page Page iSM19403: Failed to mount. iSM19404: Failed to umount. iSM19405: Collecting information of display was failed. iSM19408: Data on SV has been removed. [SV:<aaa...a>] iSM20000 iSM20000: <aaa...a> iSM20010: iSMsc_chgmod has normally terminated. iSM20011: iSMsc_chgmod has normally terminated. [vol:<aaa...a>] iSM20012: iSMsc_chgmod has abnormally terminated. iSM20013: iSMsc_chgmod has abnormally terminated. [vol:<aaa...a>] iSM20020: iSMsc_link has normally terminated. iSM20021: iSMsc_link has normally terminated. [LV:<aaa...a>] [SV:<bbb...b>] iSM20022: iSMsc_link has abnormally terminated. iSM20023: iSMsc_link has abnormally terminated. [LV:<aaa...a>] [SV:<bbb...b>] iSM20030: iSMsc_unlink has normally terminated. iSM20031: iSMsc_unlink has normally terminated. [LV:<aaa...a>][SV:<bbb...b>] Page Page iSM20104: State of SV's access mode is invalid. (mode=<aaa...a>) [SV:<bbb...b>] iSM20106: Targets volumes are not linked. [LV:<aaa...a>] [{BV|SV}:<bbb...b>] iSM20107: The volume mounted cannot be specified. [LV:<aaa...a>] Page iSM20116: Version of API is invalid. iSM20117: License for snapshot is locked. iSM20118: Snapshot function is not supported with this volume. iSM20119: Specified volume does not exist in volume list. [{BV|SV|LV|VOL}:<aaa...a>] iSM20120: Link information does not exist. [VOL:<aaa...a>] iSM20121: The volume which is not recognized cannot be specified. [BV:<aaa...a>] iSM20122: The volume which is not linked cannot be specified. [VOL:<aaa...a>] iSM20123: State of specified diskarray is 'freeze'. iSM20200: Mandatory option was not specified.(<aaa...a>) iSM20201: Illegal option was specified.(<aaa...a>) iSM20202: Illegal option value was specified.(<aaa...a>) iSM20203: Specified volume group does not exist.(vg=<aaa...a>) iSM20204: Specified disk group does not exist.(dg=<aaa...a>) iSM20205: Duplicated targets were detected. (file=<aaa...a>, line=<bbb...b> ) iSM20206: Specified file does not exist. (file=<aaa...a>) iSM20207: Specified file is invalid.(illegal file type) (file=<aaa...a>) iSM20208: Illegal configuration was detected. (file=<aaa...a>, line=<bbb...b>) Page iSM20301: The unexpected error has occurred in iSM/Server. (code=aaa...a/bb/ccc...c) iSM20302: Specified Diskarray does not exist. iSM20303: State of Diskarray includes specified volume is not monitoring. Page Page iSM20402: Unexpected error occurred. (phase=<aaa...a>) iSM20403: SCSI I/O error is detected. (device=aaaa, cdb =bbbb,status=cccc/dddd/ee/ff/gg) iSM20404: Control path is blockaded. (device=aaaa, cdb =bbbb,status=cccc/dddd/ee/ff/gg) iSM20405: Illegal device is specified. (<aaa...a>) iSM20406: Failed to umount. iSM99000 iSMnetconf: 001 iSMnetconf: 001 Command complete successfully. iSMnetconf: 101 Command has failed. (<aaa...a>) iSMnetconf: 111 Internal error has occurred. (<aaa...a>) iSMnetconf: 112 Changed to the alternative path. (<aaa...a>) iSMnetconf: 201 Resource does not exist. (<aaa...a>) iSMnetconf: 202 Many target resources exist. iSMnetconf: 203 Only root can execute. Page iSMnetconf: 222 Specified parameter is illegal. (<aaa...a>) iSMnetconf: 223 Specified IP Address is alive. (<aaa...a>) iSMnetconf: 224 Specified IP Address is illegal. (<aaa...a>) iSMnetconf: 225 Specified Subnet Mask is illegal. (<aaa...a>) iSMnetconf: 226 Specified Gateway Address is illegal. (<aaa...a>) iSMnetconf: 227 Specified IP Address is duplicated. (<aaa...a>) iSMnetconf: 228 Specified IP Address is already registered. (<aaa...a>) iSMnetconf: 229 Specified IP Address is not registered. (<aaa...a>) iSMnetconf: 230 An IP Address cannot be registered any more. (<aaa...a>) iSMnetconf: 241 Specified file cannot be read. iSMnetconf: 242 File format is illegal. (<aaa...a>) iSMprfarc: 101 iSMprfarc: 101 Not PSL file -- <aaa...a> iSMprfarc: 102 Cant open file -- <aaa...a> func=<bbb...b> errno=<cccc> iSMprfarc: 103 Cant open directory -- <aaa...a> func=<bbb...b> errno=<cccc> iSMprfarc: 104 Invalid option -- <aaaa> iSMprfarc: 105 Cant input multi-level file iSMprfarc: 106 Out of range -- <aaaa> iSMprfarc: 107 Cant find target file iSMprfarc: 108 No more archiving -- <aaa...a> iSMprfarc: 109 Cant allocate memory iSMprfarc: 110 Read error -- <aaa...a> func=<bbb...b> errno=<cccc> iSMprfarc: 111 Write error -- <aaa...a> func=<bbb...b> errno=<cccc> iSMprfarc: 112 Record broken [-- <aaa...a>] iSMprfarc: 120 Illegal file format -- <aaa...a> iSMprfarc: 201 Warning: Find discontinuous file iSMprfctl 001 iSMprfctl 001: Command completed successfully iSMprfctl 010: Missing option -- <aaa...a> iSMprfctl 011: Illegal option -- <aaa...a> iSMprfctl 012: Missing option value -- <aaa...a> iSMprfctl 013: Illegal option value -- <aaa...a> <bbb...b> iSMprfctl 020: iSMsvr is not ready iSMprfctl 021: Specified Disk Array is invalid iSMprfctl 022: Specified Disk Array is not monitored iSMprfctl 023: Specified Disk Array is not in normal state iSMprfctl 030: Specified Logical Disk is invalid iSMprfctl 031: Specified Optimization Work Disk is invalid iSMprfctl 032: Disk Capacity is different Page Page iSMprfctl 043: Specified Optimization Work Disk is not in normal state iSMprfctl 044: Number of movement exceeds permissible amount iSMprfctl 045: Specified Logical Disk is reserved iSMprfctl 046: Specified Optimization Work Disk is reserved Page iSMprfctl 090: HW error has occurred in start of Logical Disk movement iSMprfctl 910: Illegal function parameter iSMprfedit: 001 iSMprfedit: 001 <aaa...a> > <bbb...b> iSMprfedit: 100 Illegal option - <aaa...a> iSMprfedit: 101 Illegal file name - <aaa...a> iSMprfedit: 102 Missing file name iSMprfedit: 103 Missing option - <aaa...a> iSMprfedit: 110 File open error - <aaa...a> func = <bbb...b> errno = <cccc> ds = <dddddddd> iSMprfedit: 111 File close error - <aaa...a> func = <bbb...b> errno = <cccc> ds = <dddddddd> Page iSMprfedit: 120 Illegal file format - <aaa...a> ds = <bbbbbbbb> iSMprfedit: 121 Data empty - <aaa...a> Page Page iSMprfext: 001 iSMprfext: 001 <aaa...a> > <bbb...b> iSMprfext: 002 Illegal option - <aaa...a> iSMprfext: 003 Illegal option value - <aaa...a> iSMprfext: 004 File open error - <aaa...a> func = <bbb...b> errno = <cccc> iSMprfext: 005 File close error - <aaa...a> func = <bbb...b> errno = <cccc> iSMprfext: 006 Read error - <aaa...a> func = <bbb...b> errno = <cccc> ds = <dddddddd> iSMprfext: 007 Write error - <aaa...a> func = <bbb...b> errno = <cccc> iSMprfext: 008 Illegal file format - <aaa...a> ds = <bbbbbbbb> iSMprfext: 009 Data empty - <aaa...a> iSMprfext: 010 Unexpected error - <aaa...a> ds = <bbbbbbbb> iSMprfext: 011 Record count is over max value - <aaa...a> iSMprflog:001 iSMprflog:001 Disk array=<aaa...a> logging is started interval=<bb> iSMprflog:002 Disk array=<aaa...a> logging is already started iSMprflog:003 Disk array=<aaa...a> logging is started(overload) interval=<bb> iSMprflog:010 Disk array=<aaa...a> logging is stopped iSMprflog:011 Disk array=<aaa...a> logging is already stopped iSMprflog:100 Missing option - <aaaaa> iSMprflog:101 Illegal option - <aaaaa> iSMprflog:102 Missing option value - <aaaaa> iSMprflog:103 Illegal option value - <aaaaa> iSMprflog:104 Illegal function parameter iSMprflog:120 Disk array=<aaa...a> is not watched iSMprflog:121 Disk array=<aaa...a> does not exist iSMprflog:122 There is no disk array iSMprflog:123 Disk array=<aaa...a> is overload iSMprflog:900 System call error occurred func=<aaa...a> errno=<bbb> detail=<cc-ddd> Appendix A Message Output Destination List Table A-1 Message Output Destination List (2/39) Table A-1 Message Output Destination List (3/39) Table A-1 Message Output Destination List (4/39) Table A-1 Message Output Destination List (5/39) Table A-1 Message Output Destination List (6/39) Table A-1 Message Output Destination List (7/39) Table A-1 Message Output Destination List (8/39) Table A-1 Message Output Destination List (9/39) Table A-1 Message Output Destination List (10/39) Table A-1 Message Output Destination List (11/39) Table A-1 Message Output Destination List (12/39) Table A-1 Message Output Destination List (13/39) Table A-1 Message Output Destination List (14/39) Table A-1 Message Output Destination List (15/39) Table A-1 Message Output Destination List (16/39) Table A-1 Message Output Destination List (17/39) Table A-1 Message Output Destination List (18/39) Table A-1 Message Output Destination List (19/39) Table A-1 Message Output Destination List (20/39) Table A-1 Message Output Destination List (21/39) Table A-1 Message Output Destination List (22/39) Table A-1 Message Output Destination List (23/39) Table A-1 Message Output Destination List (24/39) Table A-1 Message Output Destination List (25/39) Table A-1 Message Output Destination List (26/39) Table A-1 Message Output Destination List (27/39) Table A-1 Message Output Destination List (28/39) Table A-1 Message Output Destination List (29/39) Table A-1 Message Output Destination List (30/39) Table A-1 Message Output Destination List (31/39) Table A-1 Message Output Destination List (32/39) Table A-1 Message Output Destination List (33/39) Table A-1 Message Output Destination List (34/39) Table A-1 Message Output Destination List (35/39) Table A-1 Message Output Destination List (36/39) Table A-1 Message Output Destination List (37/39) Table A-1 Message Output Destination List (38/39) Table A-1 Message Output Destination List (39/39) Appendix B Changed Message List Table B-1 Message modification list (1/32) Page Page Page Table B-1 Message modification list (5/32) Table B-1 Message modification list (6/32) Table B-1 Message modification list (7/32) Table B-1 Message modification list (8/32) Table B-1 Message modification list (9/32) Table B-1 Message modification list (10/32) Table B -1 Message modificat ion li st (11/32) Table B-1 Message modification list (12/32) Table B-1 Message modification list (13/32) Table B-1 Message modification list (14/32) Table B-1 Message modification list (15/32) Table B-1 Message modification list (16/32) Table B-1 Message modification list (17/32) Table B-1 Message modification list (18/32) Table B-1 Message modification list (19/32) Table B-1 Message modification list (20/32) Table B-1 Message modification list (21/32) Table B -1 Message modificat ion li st (22/32) Table B-1 Message modification list (23/32) Table B-1 Message modification list (24/32) Table B-1 Message modification list (25/32) Table B-1 Message modification list (26/32) Table B-1 Message modification list (27/32) Table B-1 Message modification list (28/32) Table B-1 Message modification list (29/32) Table B-1 Message modification list (30/32) Table B-1 Message modification list (31/32) Table B-1 Message modification list (32/32)