HS1100 Wireless Hotspot Gateway User Manual
yStep 6. Set Wireless – Access Point Connection
¾Band: HS1100 supports two transmission modes, Disabled, 802.11b, 802.11g and 802.11 (b+g). Select the appropriate transmission mode to work with the wireless clients in the network.
¾Channel: If the default channel has been used by many other access points, it is necessary to select another channel from the
¾ESSID: Enter a SSID (up to 32 characters) for the system. The default is HS1100. ESSID is a unique identifier used for the wireless users’ devices to associate with HS1100.
Click Next to continue.
Note: | Available channels depend upon the region you are located. For instance, Channel 1~11 | |
is available in North America, and Channel | ||
|
yStep 7. Save and Restart HS1100
Click Restart to save current settings and restart HS1100. The Setup Wizard is now completed.
ySetup Wizard. During HS1100 restart, a “Restarting now. Please wait for a while.” message will appear on the screen. Please do not interrupt HS1100 restarting process
until the message has disappeared. This indicates that the entire restart process has been completed successfully.
16
