HS1100 Wireless Hotspot Gateway User Manual
y802.1X Authentication: Enable this function and the hyperlink of Radius Client List will appear. Click the hyperlink of Radius Client List to get into the RADIUS Client Configuration list for further configuration. In the Radius Client Configuration table, depending on the Type to be selected (either Roaming Out or 802.1x), the client’s IP address will be either another NAC’s IP address (Roaming Out) or wireless AP/802.1x switch’s IP addess (802.1x). The system will handle the authentication request from these clients accordingly.
yTrans Full Name: When enabled, the ID and postfix will be transferred to the RADIUS server for authentication. When disabled, only the ID will be transferred to the RADIUS server for authentication.
yNASID: Enter the NASID of HS1100 for the external RADIUS authentication server.
yServer IP: Enter the IP address/domain name of the RADIUS server.
yAuthentication Port: Enter the authentication port for the RADIUS server and the default value is 1812.
yAccounting Port: Enter the accounting port for the RADIUS server and the default value is 1813.
ySecret Key: Enter the key for encryption and decryption.
yAccounting Service: Select this to enable or disable the “Accounting Service” for accounting capabilities.
yAuthentication Protocol: There are two methods, CHAP and PAP for selection.
55
