
HS1100 Wireless Hotspot Gateway User Manual
yLAN1 & LAN2 Port
IP PNP: Choose to enable or disable this function. If “IP PnP” is enabled, no matter what the IP address of the client device is – static or dynamic IP, users can access the network without changing the client IP address after being authenticated by HS1100.
User Authentication: Choose to enable or disable this function. If “User Authentication” is disabled, users can access the Internet without being authenticated.
Operation Mode: Choose one of the two modes, NAT mode and Router mode, by the requirements.
IP Address: Enter the desired IP address for the LAN1 & LAN2 port.
Subnet Mask: Enter the desired subnet mask for the LAN1 & LAN2 port.
yDHCP Server Configuration
There are three methods to set the DHCP Server: Disable DHCP Server, Enable DHCP Server and Enable DHCP Relay.
1.Disable DHCP Server: Disable DHCP Server function.
2.Enable DHCP Server: Choose “Enable DHCP Sever” function and set the appropriate configuration for the DHCP server. The fields with red asterisks are required to be filled in.
28