HS1100 Wireless Hotspot Gateway User Manual
Appendix A. Console Interface
Via this port to enter the console interface for the administrator to handle the problems and situations occurred during operation.
1.In order to connect to the console port of HS1100, a console, modem cable and a terminal simulation program, such as the Hyper Terminal are needed.
2.If a Hyper Terminal is used, please set the parameters as 9600,8,n,1.
The main console is a
3.Once the console port of HS1100 is connected properly, the console main screen will appear automatically. If the screen does not appear in the terminal simulation program automatically, please try to press the arrow keys, so that the terminal simulation program will send some messages to the system, where the welcome screen or main menu should appear. If the welcome screen or main menu of the console still does not pop up, please check the connection of the cables and the settings of the terminal simulation program.
