HS1100 Wireless Hotspot Gateway User Manual

Rule Item: The rule selected.

Rule Name: The rule name can be changed here.

Enable this Rule: After checking this function, the rule will be enabled.

Action: There are two options, Block and Pass. Block. “Block” is to prevent packets from passing. “Pass” is to permit packets passing.

Protocol: There are three protocols to select from, TCP, UDP and ICMP. Or choose ALL to use all three protocols.

Source MAC Address: The MAC address of the source IP address. This is for specific MAC address filter.

Source/Destination Interface: There are five interfaces to choose from, ALL, WAN, Wireless, Public LAN (LAN1/LAN2 by default) and Private LAN (LAN3/LAN4 by default).

Source/Destination IP: Enter the source and destination IP addresses.

Source/Destination Subnet Mask: Enter the source and destination subnet masks.

Source/Destination Start/End Port: Enter the range of source and destination ports.

ySpecific Route Profile

Click the hyperlink of Setting for Specific Route Profile, the Specific Route Profile list will appear.

Profile Name: The profile name can be changed here.

IP Address: The destination IP address of the host or the network.

Subnet Netmask: Select a destination subnet netmask of the host or the network.

IP Address: The IP address of the next router to the destination.

Default: Check this option to apply the default value.

81

Page 82
Image 82
NetComm HS1100 manual Specific Route Profile