JNR1010v2 N150 Wireless Router
Table 2. Back panel port, button, and connector descriptions (continued)
Port or Connector | Description |
|
|
AC power connector | AC power connector to connect the power adapter to the router. |
|
|
WPS/Reset button | This button is a WPS and Reset button: |
| • WPS button to connect computer or WiFi devices to the router’s network. |
| For more information, see |
| • Reset button to return the router to its factory settings. |
| For more information, see Factory Settings on page 90. |
|
|
Label
The label of the router shows the default login information, default WiFi network name (SSID), network key (also referred to as wireless network password or passphrase), serial number, MAC address, and other information.
Figure 4. Label on the back panel
Position Your Router
The router lets you access your network anywhere within the operating range of your wireless network. However, the operating distance or range of your wireless connection can vary significantly depending on the physical placement of your router. For example, the thickness and number of walls the wireless signal passes through can limit the range.
Additionally, other wireless access points in and around your home might affect your router’s signal. Wireless access points are routers, repeaters, WiFi range extenders, or any other device that emits a wireless signal for network access.
To position your router:
1.Place your router near the center of the area where your computers and other devices operate, and within line of sight to your wireless devices.
2.Make sure that the router is within reach of an AC power outlet and near Ethernet cables for wired computers.
3.Place the router in an elevated location, minimizing the number walls and ceilings between the router and your other devices.
Hardware Setup
11
