JNR1010v2 N150 Wireless Router
To configure Universal Plug and Play:
1.Log in to the router.
For more information, see Log In to Your Router After Installation on page 18.
2.Select ADVANCED > Advanced Setup > UPnP. A screen similar to the following displays:
3.Select the Turn UPnP On check box.
This check box is selected by default. You can enable or disable UPnP for automatic device configuration. If the Turn UPnP On check box is cleared, the router does not allow any device to automatically control the resources, such as port forwarding (mapping), of the router.
4.In the Advertisement Period (in minutes) field, type the advertisement period in minutes.
The advertisement period specifies how often the router broadcasts its UPnP information. This value can range from 1 to 1440 minutes. The default period is 30 minutes. Shorter durations ensure that control points have current device status at the expense of more network traffic. Longer durations can compromise the freshness of the device status, but can significantly reduce network traffic.
5.In the Advertisement Time to Live (in hops) filed type the advertisement time to live in hops.
The time to live for the advertisement is measured in hops (steps) for each UPnP packet sent. Hops are the steps a packet takes between routers. The number of hops can range from 1 to 255. The default value for the advertisement time to live is 4 hops, which should be fine for most home networks. If you notice that some devices are not being updated or reached correctly, it might be necessary to increase this value.
6.Click the Apply button.
Advanced Settings
69
