JNR1010v2 N150 Wireless Router
The following screen displays:
3.To specify the location where the router is used, select from the countries in the Region list. In Asia, the region is fixed to Asia and is not changeable.
4.Enter the SSID in the Name (SSID) field.
NETGEAR recommends that you do not change the default SSID. If you do decide to change the name, enter a
5.Select the channel from the Channel list.
This setting is the wireless channel used by the gateway. Enter a value from 1 through 13. For products in the North America market, only Channels 1 through 11 can be operated. Do not change the channel unless you experience interference (shown by lost connections or slow data transfers). If this happens, experiment with different channels to see which is the best. The default setting is Auto, which means that the router selects a channel automatically.
Note: When you use multiple access points, it is better if adjacent access points use different channels to reduce interference. The recommended channel spacing between adjacent access points is five channels (for example, use Channels 1 and 6, or 6 and 11).
6.Select the mode the Mode list.
Up to 150 Mbps is the default setting. The other settings are Up to 54 Mbps and Up to 145 Mbps.
genie BASIC Settings
29
