Support, Compliance, Trademarks | NETGEAR JNR1010V2 specification

JNR1010v2 N150 Wireless Router

Support

Thank you for selecting NETGEAR products.

After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. For product updates and web support, visit http://support.netgear.com.

Phone (US & Canada only): 1-888-NETGEAR.

Phone (Other Countries): Check the list of phone numbers at http://support.netgear.com/general/contact/default.aspx.

Compliance

For regulatory compliance information, visit http://www.netgear.com/about/regulatory.

See the regulatory compliance document before connecting the power supply.

Trademarks

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice.

© NETGEAR, Inc. All rights reserved.

2

Image 2

NETGEAR JNR1010V2 user manual Support, Compliance, Trademarks

Contents

JNR1010v2 N150 Wireless Router Trademarks SupportCompliance Contents Administration Appendix a Supplemental Information Hardware Setup Get to know your router Hardware Features Unpack Your Router Front Panel Router front panel has the following status LEDs JNR1010v2 N150 Wireless Router Front panel LED descriptions Back panel has the following ports, button, and connector Back Panel  To position your router Position Your RouterLabel  To prepare your router for installation Cable Your Router Verify the Cabling  To start your network Get Started with Netgear genie Connect to the router Wireless Devices and Security Settings Router Setup PreparationTypes of Logins and Access Use Standard TCP/IP Properties for Dhcp Browse to http//routerlogin.net Netgear genie Setup To use Netgear genie to set up your router Log In to Your Router After Installation Upgrade Router Firmware Basic Home Screen Change the Password Select Advanced Administration Set Password Select the Enable Password Recovery check box Password Recovery To set up password recovery  To recover your password  To use WPS to join the wireless network Add Wireless Devices or Computers to Your NetworkWi-Fi Protected Setup Method Manual Method Genie Basic Settings Your Internet connection and network Select Basic Internet Internet Setup To view or change the Internet setup Internet IP Address Internet IP Address Basic Wireless Settings Select Basic Wireless Genie Basic Settings Genie Basic Settings WPA-PSK and WPA-PSK + WPA2-PSK Mixed Mode Security Options  To configure the WEP security and wireless passphrase WEP Genie Basic Settings Select Basic Attached Devices Attached Devices To view the devices that are connected to your networks Select Basic Guest Network  To set up a guest networkGuest Network Genie Basic Settings Specify custom settings Genie Advanced Home Setup Wizard  To launch the Setup Wizard Genie Advanced Home WPS Wizard  To use the WPS Wizard Genie Advanced Home Select Advanced Setup WAN Setup WAN Setup To change the WAN settings Genie Advanced Home Default DMZ Server  To set up a default DMZ server Change the MTU Size LAN IP address LAN Setup To change the MTU size  To change the LAN settings Use Router as Dhcp Server Clear the Use Router as Dhcp Server check box Set Up Address Reservation To disable the Dhcp server feature  To reserve an IP address  To edit or delete a reserved address entry Genie Advanced Home Administration Manage your network Manually Update the Router Firmware  To check for new firmware and update your router  To back up the router’s configuration settings Manage the Configuration FileBack Up Settings Select Advanced Administration Backup Settings Do not interrupt the reboot process Restore Configuration Settings To restore configuration settings that you backed up Erase Configuration Settings Advanced Settings Enhance the performance of your router  To change advanced settings for your wireless network Advanced Wireless SettingsAdvanced Settings for Your Wireless Network Enable or Disable Wireless Router Radio  To enable or disable the wireless router radio Set Up a Wireless Schedule  To configure and enable the wireless schedule Set Up the WPS Settings  To change the WPS settings for your wireless network Wireless Distribution System Wireless repeating scenario Select Advanced Advanced Setup Wireless Repeating Function Set Up the Base Station To set up the base station Select the Enable Wireless Repeating Function check box Set Up a Repeater Select the Wireless Base Station radio button  To configure the router as a repeater Complete the Repeater IP Address field Static Routes  To set up a static routeSelect Advanced Advanced Setup Static Routes Advanced Settings Universal Plug and Play  To edit or delete a static route  To configure Universal Plug and Play Advanced Settings Monitoring Monitor your router and network traffic Router Status and Usage Information Screen  To display the Router Information pane Router Information PaneInternet Port Pane LAN Port Statistics  To view the traffic statistics Dhcp connection Connection Status To view the connection status PPPoE connection Pptp connection Guest Network Pane Wireless Settings Pane To display the Wireless Settings pane  To display the Guest Network pane Monitoring Troubleshooting Find and fix problems Quick Tips Wireless SettingsNetwork Settings Sequence to Restart Your Network Troubleshoot with the LEDs Power LED Is Off or BlinkingPower LED Stays Amber Internet or Ethernet Port LEDs Are Off WiFi LED Is OffAll LEDs Remain Lit After Startup WPS Button Blinks Amber Cannot Log In to the Router  To check the WAN IP address Cannot Access the InternetTroubleshoot Internet Browsing Troubleshoot a PPPoE Internet Connection  To troubleshoot a PPPoE Internet connection Changes Not Saved Wireless ConnectivityTroubleshoot Your Network Using the Ping Utility Test the LAN Path to Your Router Test the Path from Your Computer to a Remote Device  To ping the router from a computer running Windows Troubleshooting Supplemental Information Additional details Factory Settings JNR1010v2 router factory default settings Technical Specifications JNR1010v2 router specifications