Nikon LS8000 3b Insert the Nikon Scan 3 CD, Select Specify a location and click, Browse

Navigate to “C:\windows\system32\driv- ers” by selecting “C:” from the list of drives and double-clicking in turn on each of the following folders: “windows”, “system32”, and “drivers.” “ntmap.sys” will be selected in the list of files. Click OK and confirm that the scanner has been correctly registered with the system as described in “Confirming Device Reg- istration (Windows 98 SE)” ( 51). This completes device registration.

3b Insert the Nikon Scan 3 CD

The dialog shown at right will be dis- played. Holding down the shift key to prevent the Welcome program from start- ing automatically, insert the Nikon Scan 3 CD into the CD-ROM drive, then select the search option and click Next.

The Welcome Window

If the Welcome program starts automati- cally when you insert the Nikon Scan CD, click Exit to close the Welcome window.

4	Select Specify a location
	Select Specify a location and click

Browse.

The Welcome Window

If the Welcome program starts automatically when you insert the Nikon Scan CD, click Exit to close the Welcome window.

49