Using the FH-835S Holder for 35-mm Film Strips

The FH-835S is used when scanning strips of 35-mm film up to six frames in length. Up to two film strips can be placed in the holder at a time. When scanning a single film strip, or when scanning two strips of different lengths, use the masking sheet to mask the unused apertures in the holder ( 84).

Masking sheets

With the holder oriented so that the insertion guide is to the left, insert your fingers into the holes in the lower portion holder to unlatch the hooks holding the upper cover in place, then open the holder.

Insertion guide

Upper cover

Hooks (2)

81

Page 91
Image 91
Nikon LS8000 user manual Using the FH-835S Holder for 35-mm Film Strips