Nikon LS8000 user manual Using Nikon Scan, Using Nikon scan for the First Time

Using Nikon Scan

This example illustrates how to scan 35-mm film using the FH-835S film holder.

Using Nikon scan for the First Time

The first time you run Nikon Scan, the status LED will emit five series of rapid blinks (each of about three seconds duration) when you first insert holder with the scanner on or if you start Nikon Scan for the first time with the scanner on and a holder in place. This does not indicate an error. Do not eject the holder. If you ejected the holder while the status LED was blinking, turn the scanner off and then on again and restart Nikon Scan.

62