Nikon UT-1 user manual Removing the Battery, Stand-By Mode, Battery Level, Using an AC Adapter

A Removing the Battery
Being careful not to drop the battery, open the
battery-chamber cover and remove the battery as
shown at right.	Preparing the
A Stand-By Mode
When disconnected from the camera, the UT-1 will turn off automatically	UT
after the delay chosen for the Auto power off option in the Wireless	-1
transmitter menu (093), reducing the drain on the battery.

ABattery Level

The level of the battery inserted in the UT-1 can be determined by connecting the UT-1 to the camera (033, 62) and checking the battery level using the Battery info option (092) in the camera setup menu.

AUsing an AC Adapter

An optional EP-5B power connector and EH-5b or EH-5/EH-5a AC adapter can also be used to power the camera when the UT-1 is connected.

Introduction 11