Copying Network Profiles to the Camera

10 Enter the following information and click Next.

Network name (SSID): Enter a network name or choose from a list of existing networks. Do not change the name if it is supplied automatically.

Communication mode: Select Infrastructure or Ad-hoc.

Channel: Select a channel (ad hoc only; in infrastructure mode, the UT-1 will choose the channel automatically). Note that if a matching SSID is found on a different channel, the UT-1 may change the channel automatically.

Authentication: The authentication used on the network. Choose from open system, shared key, WPA-PSK, and WPA2-PSK (infrastructure) or from open system and shared key (ad hoc).

Encryption: The encryption used on the network. The options available depend on the authentication used.

Open: None; 64- or 128-bit WEP

Shared: 64- or 128-bit WEP

WPA-PSK: TKIP; AES

WPA2-PSK: AES

Encryption key: If the network uses encryption, enter the network key. The number of characters required depends on the type of key used:

 

WEP (64-bit)

WEP (128-bit)

TKIP, AES

Number of characters (ASCII)

5

13

8–63

Number of characters (hex)

10

26

64

 

 

 

 

Note that depending on the device and the key setting used, the UT-1 may fail to connect. If this occurs, try choosing a different key setting.

Key Index: If WEP64 or WEP128 is selected for Encryption, choose a key index (the default index is 1). A key index is not required when None is selected.

56Uploading Pictures to an ftp Server

Page 68
Image 68
Nikon UT-1 user manual WPA2-PSK AES