In PC mode, a camera equipped with a UT-1 can be controlled over a wireless or Ethernet network from a computer running Camera Control Pro 2 (available separately) and photographs saved directly to the computer hard disk instead of the camera memory card (movies are still recorded to the memory card and can consequently only be recorded when a memory card is inserted in the camera).
Connecting to the Computer
Before connecting the UT-1, confirm that the host computer is running and the user is logged in.
1After turning the camera off, open the UT-1 USB connector cover and connect the USB cable from the UT-1 to the camera USB connector (for more information on connecting USB cables to the camera, see the camera manual).
2Connect the Ethernet cable or wireless transmitter.
Ethernet networks: To access the network via Ethernet, confirm that the camera is off and connect the Ethernet cable to the computer and UT-1 as shown. Do not use force or insert the connectors at an angle. Note that wireless transfer is disabled while an Ethernet cable is connected; before accessing a wireless network, turn the UT-1 off and disconnect the Ethernet cable.
Wireless networks: Connect the WT-5 wireless transmitter as described on page 8.
