Connecting to the ftp Server
Before connecting the UT-1, confirm that the host computer is running and the user is logged in.
1Turn the camera off and insert the memory card containing the pictures to be sent (if the camera is equipped with multiple memory card slots, the card can be inserted into any slot).
Connecting to the ftp Server
2Open the UT-1 USB connector cover and connect the USB cable from the UT-1 to the camera USB connector (for more information on connecting USB cables to the camera, see the camera manual).
3Connect the Ethernet cable or wireless transmitter.
Ethernet networks: To access the network via Ethernet, confirm that the camera is off and connect the Ethernet cable to the computer and UT-1 as shown. Do not use force or insert the connectors at an angle. Note that wireless transfer is disabled while an Ethernet cable is connected; before accessing a wireless network, turn the UT-1 off and disconnect the Ethernet cable.
Wireless networks: Connect the WT-5 wireless transmitter as described on page 8.
62Uploading Pictures to an ftp Server