While on an active call

Use Call Park

Use the Call Park feature to hold temporarily (park) and retrieve a call from any telephone. Using Call Park does not tie up a line. When configured network-wide, Call Park can be used across networks. A System Park Extension can be set to automatically park most calls.

To park a call on the System Park DN or your own DN:

During an active call, press the Park key twice.

Note: By default, the call is parked on your DN unless a System Park is enabled to automatically park calls on the system.

To park a call on a DN other than the System Park DN or your own DN:

1.Press the Park key.

2.Dial the DN where you want to park the call.

3.Press the Park key.

73

Page 73
Image 73
Nortel Networks 2002 manual Use Call Park, To park a call on the System Park DN or your own DN