55

Chapter 5

DIP switch settings

This chapter describes the Dual Inline Pins (DIP) switch settings for your Instant Internet 400-S unit, including those for normal operation and for resetting your unit’s password and configuration settings.

DIP switches

DIP switches enable you to configure your Instant Internet unit for a particular type of operation. There are eight DIP switches on the rear panel of your unit (Figure 6). The switches are labeled left to right from 1 to 8.

Figure 6 DIP switches on the rear panel of the unit

Configure

Off

On

1 2 3 4 5 6 7 8

9871EA

The switches have two possible positions: on and off. For the Instant Internet 400-S unit, the off position is up and the on position is down. Use a small instrument with a fine point, such as the tip of a pen or a straightened paper clip, to move the switches to the proper position. Labels on the unit indicate whether a switch is on or off, and the specific switch pattern indicates a specific configuration item.

Setting Up the BayStack Instant Internet 400-S Unit

Page 55
Image 55
Nortel Networks 400-S manual Chapter DIP switch settings, DIP switches