58Chapter 5 DIP switch settings
Table 10 shows the switch settings for resetting your unit to factory default conditions.
Table 10 Switch settings for resetting factory default conditions
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|
|
|
|
|
|
|
|
|
OFF |
|
|
| • |
|
|
| • |
|
|
|
|
|
|
|
|
|
ON | • | • | • |
| • | • | • |
|
|
|
|
|
|
|
|
|
|
Caution: If you use these switch settings to reset your unit to factory default conditions, the following
If you purchased and installed the 3DES Encryption Module (part number
CQ1010005), you need to reinstall it.
If you used the switch settings in Table 9 to disable the reset password and configuration switch settings, these settings are
Resetting your Instant Internet unit
Before you reset your Instant Internet unit, be sure to back up the configuration. If you back up the configuration, you can easily restore it. For details, refer to Using the BayStack Instant Internet Management Software Version 7.11.
To reset your Instant Internet unit:
1Turn off your unit.
2Set the switches to the configuration you want.
