Chapter 5 DIP switch settings 59

3Turn on your unit.

The LEDs on the front of your unit flash and then glow steadily amber, including the Power LED, when they completely match the sequence for the selected switch settings.

Note: If you used the switch settings in Table 9 to disable the reset password and configuration switch settings, the Power LED glows amber and LEDs 1–8 flash red in the sequence of the selected switch settings.

4Turn off your unit.

5Reset the switches for normal operation.

Normal operation is when all the switches are in the off position. Refer to “Switch settings for normal operation” on page 56.

6Turn on your unit.

Setting Up the BayStack Instant Internet 400-S Unit

Page 58 Page 60
Page 59
Image 59
Nortel Networks 400-S manual DIP switch settings
Page 58 Page 60
Top Page Image Contents