238 Customizing the portal and user logon
3Bundle plugins.html and the JRE installer in a zip file.
4Add the zip file as custom content to the portal.
--End--
For general information about adding custom content to the portal, see
“Configuring custom content” (page 250). For information about the
minimum JRE requirements, see Release Notes for the Nortel Secure
Network Access Solution, Software Release 1.6.1 (NN47230-400),.

Windows domain logon script

Configure a Windows domain logon script to automatically launch the end
user’s browser and present the Nortel SNAS portal page on start-up. The
exact requirements for the script depend on your particular network setup
and usual modes of end-user access.
For an example of a very simple script and instructions on assigning the
script to all users in the domain, see “Using a Windows domain logon
script to launch the Nortel SNAS portal” (page 501).
Customizing the portal and logon
The following section describes the CLI commands to customize the portal
and user logon.

Roadmap of portal and logon configuration commands

The following roadmap lists all the CLI commands to customize the portal
and user logon. Use this list as a quick reference or click on any entry for
more information.
Command Parameter
/cfg/doamin #/dnscapt ena
dis
/cfg/doamin #/dnscapt/exclude list
del <index name>
add <domain name>
insert <index number> <domain name>
move <index number> <new index number>
/cfg/lang import <protocol> <server> <filename>
<code>
export <protocol> <server> <filename>
list
vlist [<letter>]
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007,2008 NortelNetworks
.