422 CLI reference
CLI command reference
The following CLI menus are accessible from the Main menu:
•Information—provides submenus for displaying information about the
current status of the Nortel Secure Network Access Switch. For the
Information menu commands, see “Information menu” (page 422).
•Statistics—provides submenus for displaying Nortel SNAS
performance statistics. For the Statistics menu commands, see
“Statistics menu” (page 423).
•Configuration—provides submenus for configuring the Nortel SNAS
cluster. Some of the commands in the Configuration menu are
available only when logged on as Administrator. For the Configuration
menu commands, see “Configuration menu” (page 424).
•Boot—used for upgrading Nortel SNAS software and for rebooting
Nortel SNAS devices. The Boot menu is accessible only when logged
on as Administrator. For the Boot menu commands, see “Boot menu”
(page 448).
•Maintenance—used for sending technical support information to
an external file server. For the Maintenance menu commands, see
“Maintenance menu” (page 449).

Information menu

The Information menu contains commands used to display current
information about the Nortel SNAS system status and configuration.
Table 67 "Information menu commands" (page 422) lists the Information
commands in alphabetical order.
Table 67
Information menu commands
Command Parameters/Submenus Purpose
/info certs
sys
sonmp
licenses
kick <user> <addr>
<group>
blacklist
domain [<domain ID>]
switches
View current information about
system status and the system
configuration.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007,2008 NortelNetworks
.